BTH108Q True Wireless Bluetooth Headset User’s manual
Contents ◼ Brief introduction…………...…………………………..…... 1 ◼ Before use……………………………………………………. 1 1. Overview…………………………………………………...……1 2. Charging for headset..……………………………………………2 2. Charging for charging case.. …………………………………2 ◼ Getting started……..…………………………………………3 1. Wearing headset.............................................................3 2. One earbud connecting with cellphone ......................................3 3. Two earbuds connecting with cellphone..........................................5 4.
Welcome to use this True Wireless Bluetoothheadset, BTH108Q. Please read this user’s manual carefully before use. ◼ Brief introduction BTH108Q is a True Wireless Bluetooth Headset ,each ear piece comes with a Microphone that can be used individually or used together for stereo sound.The earbuds supports music and calling function,as well as touch sensitive playback and pause control. ◼ Before use 1.
2. Charging for headset When the headset is low on power, it emits “Battery low” once every 2 minutes andthered Ledflashes slowly 4 times in a row every 1 minute . Please recharge the battery of the headset. The way of charging for the earbuds as following: 1. Put the earbuds into the charging case to ensure that the charging pins connect well, and start charging when you see the red indicator light of the earbuds on. Red light on: Charging Red light off: Finish charging 2.
case is off and it cannot charge the earbuds, it means that the battery of the charging case has been exhausted.You need to charge the charging case: The way of charging for the charging case as following: Using USB cable 1) Plug the micro USB charging cable into the case’s charging jack. 2) Plug the USB cable into a USB port of PC or a 5Volt USB charge. Red light on: Charging Red light off: Finish charging 3) Charging should be completed in roughly 1.5 hours.
◼ Getting started 1. Wearing headset a. Choose the suitable size ear tips b. Ensure each earbuds is worn on the correct ear. “L” should be worn on the left ear and “R”worn on the right ear. Left ear Right ear 2.One earbud connecting with cellphone Each earbuds can be connected singly to the cellphone. 1. Power on 1)When charging, the earbuds will turn on automatically when they are taken out of the charging case.
3.Connecting To connecting your earbuds to a Bluetooth device, first ensure the device has Bluetooth enable and it is in pairing mode(See your device manual for setting pairing mode) . Once your earbuds are in pairing mode, you should be able to see it in the list of Bluetooth devices. You should see BTH108Q-L for left earbuds or BTH108Q-R for the right earbuds appear in your contactable devices list.After successful connection, the earbuds prompts "Phone is connected".
minutes, and automatically turn off after 5 minutes. 4 3.Two earbuds connecting with cellphone In this mode use two earbuds at the same time to enjoy stereo sound. 1)Turn on the master earbud (BTH108Q-L) and connect it with you Bluetooth device,then power on the other earbud and it will connect with each other automatically. 2)master-slave switch: When master earbud is successfully paired with the phone, the phone will Pop-up a dialog : “Headset would like to pair with your phone”.
4.Earbuds pairing/connecting Please use this step if two headset can not be connect with each other. 1.Turn off two earbuds respectively(don’t put them into the charging case). 2.Clear the pairing list: Choose one of the earbuds. Firstly, enter the pairing mode.Then hit the touch button 5 times, while the red LED and the blue LED turns on for 1 second. The pairing list will be cleared when emits prompt tone. The other headset cleans the pairing list by doing the same. 3.
1. music Status of earbuds Function Play Pausing Playing music Previous Playing song music Playing Next song music Playing Volume up music Volume Playing down music Pause L R Prompt tone Double-click Double-click Dang touch-button touch-button Double-click Double-click Dang touch-button touch-button Press Left touch N/A Dang button about 2s Press Right touch N/A Dang button about 2s N/A Once-click Right Dang touch-button Once-click Left N/A Dang touch-button 2.
down touch-button 6.Function operation----two earbuds connecting with cellphone 1.
Volume up During a call N/A Once-click touch-button Dang Volume Once-click During a call N/A Dang down touch-button 3. Gang control to power off When using two earbuds, either earbud of the left or right turns off, and the other earbud will be turned off at the same time. The earbuds will have corresponding indicator light and prompt sound when they turns off.
Earbuds Charging case Red and blue LED flash quickly alternately Red and blue LED flash slowly alternately blue LED flashes every 5 seconds blue LED flashes twice every 10 seconds Red LED flashes four times every minute White LED flashes every 2 seconds White LED flashes three times every two seconds White LED kept on Pairing mode with phone TWS pairing mode Unconnected Connected Low battery Low battery Full battery Has been charged 9.
Following these you will be able to enjoy this product for many years. ◆ Keep it dry and don’t put it in the dump place to avoid the product’s internal circuit being affected. Don’t wear the headset when in strong exercise toavoid sweat enter. ◆ Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts. ◆ Don’t expose the product to cold areas. It may damage the internal circuit board.
a) Make sure the mobile phone is in the strong signal area; b)Make sure the headset is in the available range. and no other block。 5.
on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
