BTH171Q True Wireless Bluetooth Headset User’s manual
Contents ◼ Brief introduction…………...…………………………..…... 1 ◼ Before use……………………………………………………. 1 1. Overview…………………………………………………...……1 2. Charging for headset..……………………………………………2 2. Charging for charging case.. …………………………………2 ◼ Getting started……..…………………………………………3 1. Wearing headset.............................................................3 2. One earbud connecting with cellphone ......................................3 3. Two earbuds connecting with cellphone..........................................5 4.
Welcome to use this True Wireless Bluetoothheadset, BTH171Q. Please read this user’s manual carefully before use. ◼ Brief introduction BTH171Q is a True Wireless Bluetooth Headset ,each ear piece comes with a Microphone that can be used individually or used together for stereo sound.The earbudsare equipped with a charging case, which is convenient to carry and charge. The charging case supports wireless charging, and you can charge the charging case with your wireless charger. ◼ Before use 1.
2. Charging for headset When the headset is low on power, it emits “Battery low” once every 2 minutes andthered Ledflashes slowly 4 times in a row every 1 minute . Please recharge the battery of the headset. The way of charging for the earbuds as following: 1. Put the earbuds into the charging case to ensure that the charging pins connect well, and start charging when you see the red indicator light of the earbuds on. Red light on: Charging Red light off: Finish charging 2.
light of the charging case flashes once every 2 seconds. It means that the charge case is low power. 2) When the indicator light of the charging casedoesn’t turn on and the earphone cannot be charged, it means that the battery of the charging case has been used up The charging case supports USB cable charging and wireless charging. The way of charging for the charging case as following: Using USB cable 1) Plug the Type-C charging cable into the case’s charging jack.
◼ Getting started 1. Wearing headset a. Choose the suitable size ear tips b. Ensure each earbuds is worn on the correct ear. “L” should be worn on the left ear and “R”worn on the right ear. Left ear Right ear 2.One earbud connecting with cellphone Each earbuds can be connected singly to the cellphone. 1. Power on 1)When charging, the earbuds will turn on automatically when they are taken out of the charging case.
3.Connecting To connecting your earbuds to a Bluetooth device, first ensure the device has Bluetooth enable and it is in pairing mode(See your device manual for setting pairing mode) . Once your earbuds are in pairing mode, you should be able to see it in the list of Bluetooth devices. You should see BTH171Q-L for left earbuds or BTH171Q-R for the right earbuds appear in your contactable devices list.After successful connection, the earbuds prompts "Phone is connected".
3.Two earbuds connecting with cellphone In this mode use two earbuds at the same time to enjoy stereo sound. 1)Turn on the master earbud (BTH171Q-L) and connect it with you Bluetooth device,then power on the other earbud and it will connect with each other automatically. 2)master-slave switch: When master earbud is successfully paired with the phone, the phone will Pop-up a dialog : “Headset would like to pair with your phone”. If you click “pair”, the slave earbud will also be paired with the phone.
4.Earbuds pairing/connecting Please use this step if two headset can not be connect with each other. 1.Turn off two earbuds respectively(don’t put them into the charging case). 2.Clear the pairing list: Choose one of the earbuds. Firstly, enter the pairing mode.Then hit the touch button 5 times, while the red LED and the white LED turns on for 1 second. The pairing list will be cleared when emits prompt tone. The other headset cleans the pairing list by doing the same. 3.
5.Function operation-use one earbud 1. music Function Play Status of earbuds Pausing Playing music Previous Playing song music Playing Next song music Playing Volume up music Volume Playing down music Pause L R Prompt tone Double-click Double-click Dang touch-button touch-button Double-click Double-click Dang touch-button touch-button Press Left touch N/A Dang button about 2s Press Right touch N/A Dang button about 2s N/A Once-click Right Dang touch-button Once-click Left N/A Dang touch-button 2.
Volume down During a call Once-click touch-button N/A Dang 6.Function operation----two earbuds connecting with cellphone 1.
SIRI device Volume up During a call touch-button N/A Once-click touch-button Dang Volume Once-click During a call N/A Dang down touch-button 3. Gang control to power off When using two earbuds, either earbud of the left or right turns off, and the other earbud will be turned off at the same time. The earbuds will have corresponding indicator light and prompt sound when they turns off.
8. Meaning of indicator light indicator light Earbuds Red and white LED flash quickly alternately Red and white LED flash slowly alternately White LED flashes every 5 seconds White LED flashes twice every 10 seconds Red LED flashes four times every minute Charging White LED flashes every 2 case seconds White LED flashes three times every two seconds White LED kept on Prompt tone Pairing mode with phone TWS pairing mode Unconnected Connected Low battery Low battery Full battery Has been charged 9.
◼ Care and maintenance Read the following recommendations carefully before using BTH171Q. Following these you will be able to enjoy this product for many years. ◆ Keep it dry and don’t put it in the dump place to avoid the product’s internal circuit being affected. Don’t wear the headset when in strong exercise toavoid sweat enter. ◆ Keep the product away from direct sunlight or hot places. High temperatures will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
4. Why can’t I hear the sound clearly on the headset? a) Make sure the mobile phone is in the strong signal area; b)Make sure the headset is in the available range. and no other block。 5.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
