User's Manual

3.Mono mode
Each earbuds can be connected singly to the cellphone.
1. Power on
1)In the charging state, open the charging box top case or take the earphone
out of the charging box, and the earphone will automatically turn on.
2)If the earbuds are power off, you should press touch-button for about 3s
until blue LED flashes as the same time the earbuds emits “Power on”. Then
release. This is now in the “Power on”state.
2.Pairing
1) When we open the charging case, it will be power on and turn into
pairing mode. Then it will connect back to the phone you paired with
before.When the earbuds and the cellphone fails to connect back, the
earbuds will automatically enter the pairing state.
2) If the earbuds are power off, you should press touch-button for about 5s
and release it when the red LED and blue LED flash quickly and alternately.
You will hear “Pairing”. The earbuds are in “Pairing”mode
3.Connecting
When the headset is in pairing mode, search for the corresponding Bluetooth
phone name from the Bluetooth list of the phone and click Connect (some
phones do not have a connection pop-up window). After the pairing and
connection are successful, both ears will simultaneously display
"Connected".