User's Manual

earbuds and the cellphone fails to connect back, the earbuds will
automatically enter the matching state.
2) If the earbuds are power off, you should press touch-button for about 5s
and release it when the red LED and blue LED flash quickly and alternately.
The earbuds are in”Pairing”mode.
3
3.Connecting
To connecting your earbuds to a Bluetooth device, first ensure the device
has Bluetooth enable and it is in pairing mode(See your device manual for
setting pairing mode) . Once your earbuds are in pairing mode, you should
be able to see it in the list of Bluetooth devices.
You should see BTH182H appear in your contactable devices list.After
successful connection, the earbuds prompts ‘Connected’.
4.Power off
1）Auto power off once put into charging case
2）Press touch-button about 5s and release it till red LED is on,and earbuds
prompt “Power off”.
Remark:
 Each earbuds will automatically switch to standby mode if disconnected
from device(blue LED flash once every 2 seconds), and will power off
automatically after 2 minutes to save power.
 The pairing mode will last for 2 minutes. If it is not paired with any