User's Manual

mobile phone after 2 minutes, the earbuds will shut down automatically.
3.Two earbuds connecting with cellphone
In this mode use two earbuds at the same time to enjoy stereo sound.
1)Turn on any one of earbuds and connect it with you Bluetooth device,then
power on the other earbud or take out it from the charging case, and it will
connect with each other automatically.
2)primary-secondary switch:In the following cases, the secondary earbud
can automatically switch and connect to the mobile phone, so you continue
to use:
(1) In the process of use, when the power of the primary earbuds is lower
than that of the secondary earbuds, the role switch will be automatically
performed to maintain the relative balance of power between the two
earbuds and obtain the service time of longer binaural mode.
(2) When the primary earbud is put into the charging case, the secondary
earbud will be automatically connected to the mobile phone.
4.Earbuds pairing/connecting
Please use this step if two headset can not be connect with each
other.
1.Turn off two earbuds respectively(don’t put them into the charging case).
2.Clear the pairing list: Choose one of the earbuds. Firstly, enter the pairing
mode.Then hit the touch button 5 times, while the red light turns on for 1
second. The other headset cleans the pairing list by doing the same.