Installation Manual

1) Remove the stock airfilter.
2) Position the plastic cage onto the filter element as shown below.
3) Slide the K&N Air Filter/cage assembly into the airbox. Make sure that it is properly seated on the sealing surface.
4) Close the access door of the airbox.
5) To remove the filter assembly, gently pull on the filter material until the assembly is free to slide out.
CAUTION - Use only gentle finger pressure to remove the filter. Do not use any tools or the filter material might
be damaged.
INSTALLATION INSTRUCTIONS
Part Number 33-2054
• 1455 CITRUS St., P.O. BOX 1329, RIVERSIDE, CA., U.S.A. 92502 • TECH SERVICE 800-858-3333 • FAX [phone]
• e-mail: [e-mail] • WWW: http://www.knfilters.com
17049a
04/10/08
This filter fits: See current K&N catalog for complete listing
*FREE K&N DECAL To register your warranty, please see us online at knfilters.com/register. FREE K&N DECAL*
Congratulations, you have purchased the finest air filter that money can buy. With proper care, this filter will last 1 mil-
lion miles or more. This filter is a direct replacement for the stock air filter, and no modifications wil be required.
However the following procedure MUST be followed to ensure a proper fit and seal of the K&N Air Filter.
Installation
These instructions must be followed every time the filter is serviced, otherwise the
filter may not seal, and damage to the engine could result.