Installation Manual

INSTALLATION INSTRUCTIONS
Part Number 38-0735 / 38-0737 / 38-0739
Congratulations, you have purchased the finest air filter that money can buy. With proper
care, this filter can last many seasons. This filter can be used in a stock machine, with no
modifications required. If any engine modifications have been made tuning/jetting adjust-
ments may be required. There are special installation instructions, so please follow the pro-
cedures outlined below to ensure the K&N Air Filter seals properly.
1. Remove Old filter from frame by flattening tabs on one side of “L” bracket only. Open frame up
by lifting the top part of the frame. Remove stock paper filter and screen wire.
2. Clean inside of frame. Apply bead of K&N Sealing Grease to inside of frame where filter will
seat.
3. Slip K&N air filter into frame. Push “L” bracket back into loops. Bend tabs back up on “L”
bracket.
04/01/08
17262a
• 1455 CITRUS St., P.O. BOX 1329, RIVERSIDE, CA., U.S.A. 92502 • TECH SERVICE 800-858-3333 • FAX [phone]
• e-mail: [e-mail] • WWW: http://www.knfilters.com
Installation
THESE INSTRUCTIONS MUST BE FOLLOWED EVERY TIME THE FILTER IS SER-
VICED, OTHERWISE THE FILTER MAY NOT SEAL, AND DAMAGE TO THE
ENGINE COULD RESULT.
This filter fits: See catalog for current applications