Installation Manual

Congratulations, you have purchased the finest air filter that money can buy. With proper care, this filter can last
many seasons. This filter can be used in a stock machine, with no modifications required. If any engine
modifications have been made tuning/jetting adjustments may be required. There are special installation
instructions, so please follow the procedures outlined below to ensure the K&N Filtercharger
®
seals properly.
INSTALLATION INSTRUCTIONS
Part Number HA-1088
• 1455 CITRUS ST., P.O. BOX 1329, RIVERSIDE, CA., U.S.A. 92502 • TECH SERVICE 800-858-3333 • FAX [phone]
• e-mail: [e-mail] • WWW: http://www.knfilters.com
17246c
7/2506
THESE INSTRUCTIONS MUST BE FOLLOWED EVERY TIME THE FILTER IS SERVICED,
OTHERWISE THE FILTER MAY NOT SEAL, AND DAMAGE TO THE ENGINE COULD
RESULT.
1. Remove the stock air filter.
2. Apply the provided K&N Sealing Grease or equivalent to the outside of the flange. (Fig. 1)
3. Install the K&N Filtercharger
®
flange side first.
4. Reinstall the spring that holds in the air filter.
5. Reinstall the air box lid.
INSTALLATION
Fig. 1
A
vailable to purchase separately
Precharger Wrap; part number 22-8008PK
This filter fits: SEE CATALOG FOR CURRENT APPLICATIONS