Installation Manual

This filter fits: SEE CATALOG FOR CURRENT APPLICATIONS
Congratulations, you have purchased the finest air filter that money can buy. With proper care, this filter can last
many seasons. This filter can be used in a stock machine, with no modifications required. If any engine
modifications have been made tuning/jetting adjustments may be required. There are special installation
instructions, so please follow the procedures outlined below to ensure the K&N Filtercharger
®
seals properly.
INSTALLATION INSTRUCTIONS
Part Number HA-4099
• 1455 CITRUS ST., P.O. BOX 1329, RIVERSIDE, CA., U.S.A. 92502 • TECH SERVICE 800-858-3333 • FAX [phone]
• e-mail: [e-mail] • WWW: http://www.knfilters.com
17069c
6/1/06
THESE INSTRUCTIONS MUST BE FOLLOWED EVERY TIME THE FILTER IS SERVICED,
OTHERWISE THE FILTER MAY NOT SEAL, AND DAMAGE TO THE ENGINE COULD
RESULT.
1. Remove the stock air filter.
2. Install the supplied hose clamp over the intake tube in the air box.
Note: Make sure the hose clamp is loose.
3. Install the K&N Filtercharger
®
.
4. Pull the air filter rearward until it contacts the stops on the bottom of the air box. (Fig. 1)
5. Tighten the hose clamp.
6. Reinstall the air box lid.
INSTALLATION
Air Filter Stop
Intake Tube
Fig. 1
Available to purchase sep
arately
Precharger Wrap; part number 22-8016PK