Installation Manual

1. Remove the stock air fi lter.
2. Remove the o-rings from the air box base and the lid.
3. Install the K&N Air Filter making sure it is completely seated.
Note: The K&N logo and air fi lter part number will be facing up.
4. Reinstall the air box lid.
Installation Instructions
Part Number: HA-8098
This Filter Fits: SEE CATALOG FOR CURRENT APPLICATIONS
Congratulations, you have just purchased the fi nest air fi lter that money can buy. With proper care,
this fi lter will last 1 million miles or more. This fi lter can be used in a stock machine, with no modifi ca-
tions required. If any engine modifi cations have been made tuning/jetting adjustments may be
required. There are special installation instructions, so please follow the procedures outlined below to
ensure the K&N air fi lter seals properly.
INSTALLATION:
THESE INSTRUCTIONS MUST BE FOLLOWED EVERY TIME THE FILTER IS
SERVICED, OTHERWISE THE FILTER MAY NOT SEAL, AND DAMAGE TO THE
ENGINE COULD RESULT.
•1455 Citrus St. P.O. Box 1329, Riverside, C.A. USA 92502 • Tech Service 800-858-3333 • Fax [phone]•
•Email: tech@knfi lters.com • WWW: http://www.knfi lters.com
17228b
06/10/08