Installation Manual

• 1455 CITRUS ST. P.O. BOX 1329, RIVERSIDE, CA., U.S.A. 92502 • TECH SERVICE 800-858-3333 • FAX [phone]
• e-mail: [e-mail] • WWW: http://www.knfilters.com
This filter fits: SEE CATALOG FOR CURRENT APPLICATIONS
Congratulations, you have purchased the finest air filter that money can buy. With proper care, this filter can last
many seasons. This filter can be used in a stock machine, with no modifications required. If any engine
modifications have been made tuning/jetting adjustments may be required. There are special installation
instructions, so please follow the procedures outlined below to ensure the K&N Air Filter seals properly.
INSTALLATION INSTRUCTIONS
Part Number PL-5207
18785a
04/28/08
THESE INSTRUCTIONS MUST BE FOLLOWED EVERY TIME THE FILTER IS SERVICED,
OTHERWISE THE FILTER MAY NOT SEAL, AND DAMAGE TO THE ENGINE COULD
RESULT.
1. Remove the stock air filter from the air box.
2. Remove the stock air filter from the stock air filter cage assembly.
3. Use snips and remove the air filter cage. (Fig.1)
4. Install the air filter cage base into the K&N Air Filter. (Fig. 2)
5. Install the stock clamp onto the intake tube in the air box. The clamp should be loose. (Fig. 3)
6. Install the K&N Air Filter into the intake tube making sure it is completely seated. (Fig. 4)
7. Tighten the clamp.
8. Reinstall the air box lid.
Available to Purchase Separately:
Drycharger Wrap; Part Number PL-5207DK
INSTALLATION
Fig. 1
Fig. 2
Fig. 3
Fig. 4