Specifications

2. Range of humidity: 20%-99%.

3. Tendency of temperature change: one check per hour, compared to previous data. If the

temperaturechangesmorethan1ºCthearrowwillbeat.

Pressure and Weather Forecast:

1. Turn on power to set the height, or it will be 0.

2. Two kind of pressure units: Hpa/Mb or in Hg

3. Records the pressure data of the past 12 hours.

4. Compares the pressure data with the previous data every 60 minutes. If the change is more than

2 hpa the pressure arrow will change.

5. Checks data every hour and will display the weather graphics according to the result.

RCC Reception Mode:

1. RCC reception format: DCF, the reception time is about 10 minutes.

2. RCC reception way.

3. It will begin to receive the RCC 3 minutes after turning on the unit.

4. RCC reception graphic:

Thetowergraphicasheswhenreceiving,thetowergraphicwillalsoashwhenlostornosignal.The

towergraphicwillnotashwhensynchronizingthesignal,butthearc-shapedantennasymbolontop

ofthetowergraphicisashing.ThewholeRCCreceptiongraphicwilldisplaywhenthereceptionis

successful: The tower graphic will turn off and exit RCC when the signal reception fails.

Part II

Thereare5buttonsattherear:RST,UP,DOWN,HISTROY,ALERT.Thesebuttonsareusedforthe

following functions:

1. ALERT Button

* While in normal display mode, press this button to activate or deactivate the temperature alert

function. An arrow icon will appear to indicate the funcion has been activated, or the arrow icon will

disappear to indicate the alarm is deactivated.

* While in normal display mode, press and hold this button for 3 seconds to enter the temperature

alertsettings.Thedoortemperaturedigitswillstartashes.PresstheALERTbuttonattherearto

set the temperature (0°C-50°C) at which the statio nhas to sound an alarm.

2.UPButton(attherear)

* In normal display mode press this button to select pressure unit between Hpa /Mb or Hg.

* In normal display mode press and hold this button for 3 seconds to enter weather forecast display

mode, select by pressing the DOWN button (at the rear) among sunny, cloudy, rainy, etc.

3. DOWN button (at the rear)

* In normal display mode press this button to toggle between degrees Celsius or Fahrenheit.

4. HISTORY Button

* Press this button repeatedly to show the history record of the barometer of the past 12 hours. The

hour is displayed in the bottom right corner of the barometer chart.

* In normal display mode press this button to check the barometer history of 12 the past hours.

* In normal display mode press and hold this button for 3 seconds to enter sea level setting.

5. RESET

Press this button to reset all functions.