Instruction manual

4
• Ensure that all electrical connections (including the main plug, extension leads and connections
between pieces of equipment) are properly made and in accordance with the manufacturer’s
instructions
• Consult your dealer if you are ever in doubt about the installation, operation or safety of your
equipment
IMPORTANT
The CD mechanism and the sensitive circuitry may cause interference to any nearby radio tuners.
Do not operate this CD player while operating other radio devices. DANGER: this product utilizes
invisible laser radiation. Avoid direct exposure to the beam.
OPERATION MANUAL
POWER ON
Press PLAY/PAUSE to turn the power on.
LCD screen will display “40 SEC”
The player will go to the anti-shock mode once upon being powered and the anti-shock symbol
“ESP” appears on the screen. Press ASP/DIR button to quit anti-shock.
LCD screen will display “NO DISC” if no disc is detected by the player.
CD mode LCD screen will display “Er” if the disc data cannot be read.
Once the disc is recognized by the player, the total number of tracks and its needed playback time
will appear on the screen. For an MP3 disc, the screen will display the total number of albums and
tracks.
MP3 Mode
After a few seconds, the player will start playback from the first track automatically.
Press STOP button to stop playing.
CD Mode
The player will remain in stop mode for a few seconds and then shut down automatically.
In the STOP mode, the display is read as below:
MP3 mode
PAUSE
Press PLAY/PAUSE button to pause on/off alternately.