User manual

7
2.4 Single Satellite Search
1. Satellite :
Press keys to select the satellite in circle. Or press OK key to pop up the drop-down list,
then select the desired satellite in the list and press OK key to confirm.
2. FTA Only: Press keys to select between Yes and No.
3. Scan Channel: Press keys to select among TV+Radio, TV Channel, Radio.
4. Network Search: Select between No and Yes. This item turns grey when Auto Scan is
selected in the following Scan mode item.
5. Scan Mode: Press keys to select between Auto Scan and Blind Scan. Auto Scan is
searching the preset transponders, while Blind Scan is to search the whole frequency
band.
6. Search: Press OK key to start searching.
2.5 Multi Satellite Search
From the Multi Satellite Search window, you can search several satellites at the one
time.
1. Satellite: All selected satellites in the satellite list window are displayed on the
down part. You can press keys to switch among them.
2. FTA Only: Press keys to select between Yes and No.
3. Scan Channel: Press keys to select among TV+Radio, TV Channel, Radio.
4. Network Search: Select between No and Yes. This item turns grey when Auto
Scan is selected in the following Scan mode item.
5. Scan Mode: Press keys to select between Auto Scan and Blind Scan. Auto Scan is
searching the preset transponders, while Blind Scan is to search the whole frequency
band.
6. Search: Press OK key to start searching.
2.6 TP List
1. Press ◄/► keys to select the proper satellite.
2. Press red colour key to pop up the Edit TP window.
Frequency, Symbol rate: Press keys to add or reduce by step one. Or press numeric
keys (0-9) to input the desired value. The range of the frequency is 3000-13450, while the
range of the symbol rate is 1000~45000. The inputted value is beyond this range, the value
will return to the original value.
Polarity: Press keys to switch between Vertical and Horizontal.
3. Press green colour key to pop up the Add TP window. Since the same operation as the
above Edit TP window, here we don't explain any more.
4. Press yellow colour key to pop up dialogue " Are you sure to delete?". Press OK key at
the Yes button to delete the selected TP, or press EXIT key to cancel the operation.
5. Press blue colour key to pop up the TP Search window.
FTA only, Scan Channel, Network Search: Press keys to select the proper option.
Press OK key at the OK button to start searching.
English Deutsch Français Nederlands
Italiano Español Magyar Suomi Svenska Česky