User manual

22
PR168
Hb
PR167/1
Hd
Hb
Place the small square on the guide again and fix it
with the screws supplied.
Should the lining up of the furniture door be
necessary, use the clearance of slots.
At the end of operations, it is necessary to check if
the door of the furniture closes properly.
Fix cover (Hd) on guide (Hb) until it clips into place.
If the appliance is fixed to the side of the kitchen unit,
simply slacken the screws in the fixing brackets (D),
move the brackets as shown in the figure and re-
tighten the screws. Fit cover (E).
D
E
D734
Ha
8mm
K
Remove the brackets and mark a distance of 8 mm
from the outer edge of the door where the nail must
be fitted (K).