User manual

ChildLock function
To lock any possible operation through the
buttons select the ChildLock function.
1. To switch on the function:
a. Press Functions until the
corresponding icon appears.
The ChildLock indicator flashes.
b. Press OK to confirm.
The ChildLock indicator is shown.
2. To switch off the function:
a. Press Functions until the ChildLock
indicator flashes.
b.
Press OK to confirm.
The ChildLock indicator goes off.
FastFreeze function
This function stops automatically after 52
hours.
1.
To switch on the function:
a.
Press Functions until the
corresponding icon appears.
The FastFreeze indicator is flashes.
b.
Press OK to confirm.
The FastFreeze indicator is shown.
2. To switch off the function before its
automatic end:
a. Press Functions until the FastFreeze
indicator is flashes.
b. Press OK to confirm.
The FastFreeze indicator goes off.
The function switches off by
selecting a different freezer set
temperature.
High temperature alarm
An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure or door is open) is
indicated by:
• flashing the alarm and freezer
temperature indicators;
• sounding of buzzer.
To reset the alarm press any button.
The buzzer switches off.
The freezer temperature indicator shows
the highest temperature reached for a few
seconds. Then show again the set
temperature.
The alarm indicator continues to flash until
the normal conditions are restored.
When the alarm has returned
the alarm indicator goes off.
DrinksChill function
The DrinksChill mode is to be used to set
an acoustic alarm at the preferred time,
useful, for example, when you want to
rapidly chill food products for a certain
length of time.
1.
To switch on the function press
Functions button until the
corresponding icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30 minutes)
for a few seconds.
2.
Press the Timer to change the Timer set
value from 1 to 90 minutes.
3.
Press OK to confirm.
DrinkChill indicator is shown. The Timer
starts to flash (min).
At the end of the countdown the DrinksChill
indicator flashes and an audible alarm
sounds.
4. Press OK to switch off the sound and
terminate the function.
It is possible to deactivate
the function at any time
during the countdown by
pressing Functions until
DrinksChill indicator flashes
and then pressing OK to
confirm.
It is possible to change the
time during the countdown
and at the end by pressing
the temperature colder
button and the temperature
warmer button.
Door open alarm
An acoustic alarm will sound when the door
is left open for around 80 seconds.
19