Operation Manual

e. Press the DOWN button to complete the process. Move the dial back to AUTO.
Additional Features of the 3208-WRFS (Wireless Rain Freeze Sensor)
• The Pro EX 2.0 Wi enabled controller comes from the factory with wired rain sensor
terminal enabled. Once a wireless rain sensor has been paired with the Pro EX 2.0
Wi enabled controller the terminals for a wired rain sensor become disabled.
• The Pro EX 2.0 Wi enabled controller stores the temperature and date of the last day
watering was suspended by either a rain event or by the freeze sensor (when ambient
temperature fell below freezing point).
This procedure is used to deactivate the wireless rain sensor
and enable the wired rain sensor terminals of the Pro EX 2.0 Wi
enabled controller. To do so, press the BACK and NEXT buttons
SIMULTANEOUSLY until the word WIRED has stopped ashing.
To display this information, put the controller dial
on the REMOTE / PIN location. Press the UP button,
until it displays the SENSOR information screen.
This screen shows the user the battery % remaining
of their wireless rain sensor, and the temperature at
the last time the rain sensor was triggered.
NOTE: The user can always change the temperature
unit of measurement to Celsius degree by pressing
the BACK and NEXT buttons SIMULTANEOUSLY on
this screen.
To go to the next sensor feature, press the NEXT
Button and the screen will display the DATE
when the rain sensor was last triggered.
The last screen in this section shows the word
“Wired” ashing.
SELECT
START > PIN 1111 NO WIFI
At Remote
Pin Dial
Location
LEARNBattery - TEMP
DATE
“WIRED”
NOTE: The manual activation of some
controllers bypasses the sensor inputs.
The controller must be in Automatic mode
in order for the sensor to work properly.
99% 75F
22 FEB 16
WIRED
START
A
PGM
LEARNED
Sensor
Sensor
mon
Sensor DAY month year
Sensor
04