Datasheet

Kärcher Rain System®

Sealing Collar

Sealing collars can be attached at any point on the Kärcher Rain System® hose. They can be easily installed

and reliably seal collar holes that are no longer required.

Equipment:

•

Sealing collars 5 piece(s)

Order no.: 2.645-235.0

Technical data

Dimensions (L x W x H) (mm) 80x24x21.5

Weight (kg) 0.01

Diameter -

Hose length -

Max. pressure (bar) 4

PAGE 1
Kärcher Rain System® Sealing Collar Sealing collars can be attached at any point on the Kärcher Rain System® hose. They can be easily installed and reliably seal collar holes that are no longer required. Equipment: • Sealing collars 5 piece(s) Order no.: 2.645-235.0 Technical data Dimensions (L x W x H) (mm) 80x24x21.5 Weight (kg) 0.01 Diameter - Hose length - Max.
PAGE 2
Details Description Sealing collars are part of the "Kärcher Rain System®". They can be quickly attached anywhere on the Kärcher Rain System® hose and are used to reliably seal collar holes that are no longer required. The rubberised surface and the integrated pin on the inside make this possible. Installation is fast, easy and does not require tools. The pin is stuck into the hole to be sealed and the collar is closed.