Datasheet

12/2003

1/2

Cleaner for plastic surfaces

Properties

* Cleaning agent for use with high pressure cleaner or for manual cleaning

* for cleaning oil, grease and mineral soiling

* very gentle to materials

* manual applicable

* easily biodegradable in accordance with OECD guidelines

* pH- value in concentrate approx. 10

* clear, yellow liquid with fresh odour

Fields of application:

* window frames * plastic surfaces

* garden furniture * all water resistant surfaces

* plastic floors

Processing:

pre-dilution dosage temperature

* manual normal soiling 1+10 pre-dilution up to 40°C

heavy soiling pure pre-dilution up to 40°C

* high pressure cleaning 1+3 1-5% up to 60°C

heavy soiling pure 1-5% up to 60°C

Economy:

1 l Plastic Cleaner is sufficient for cleaning of approx. 40 m², presolved 1+3, dosage 4% at

the high-pressure appliance, medium soiled area.

Handling:

pre-dilution: first measure the necessary amount of water, then add Plastic Cleaner under

stirring and mix properly.

Remarks:

* store frostfree

Plastic- Cleaner

PAGE 1
Plastic- Cleaner Cleaner for plastic surfaces Properties * Cleaning agent for use with high pressure cleaner or for manual cleaning * for cleaning oil, grease and mineral soiling * very gentle to materials * manual applicable * easily biodegradable in accordance with OECD guidelines * pH- value in concentrate approx.
PAGE 2
Plastic- Cleaner Attention: S 2 Keep out of the reach of children S 23 Do not breathe aerosol Further information: * Material safety data sheet Process: Object: e.g. plastic floor * make predilution: mix 1 L Plastic Cleaner with 3 L of water (at medium soiling) * dosage approx. 5% at the high pressure cleaner, temperature up to 60°C * clean the floor in steady and overlapping traces * rinse with clear water Alfred Kärcher GmbH & Co.