KMR 1550 B 1.948-204 1.948-224 www.karcher.com 5.
Deutsch Bedienungsanleitung Ersatzteilliste Seite 1 Seite 242 English Operating Instructions Spare Parts List Page 23 Page 242 Notice d’instructions Liste des pièces de rechange Page 45 Page 242 Français Italiano Nederlands Español ÅëëçíéêÜ Istruzioni per l’uso Elenco pezzi di ricambio Pagina 67 Pagina 242 Gebruiksaanwijzing Lijst met vervangingsonderdelen Pagina 89 Pagina 242 Instrucciones de servicio Lista de repuestos Página 111 Página 242 Ïäçãßåò ÷åéñéóìïý ÊáôÜëïãïò áíôáëëáêôéêþí Óåëßäá
KMR 1550 B Contents Operating instructions for users English For your safety ................................................................. 24 On behalf of the environment ......................................... 25 Intended applications ...................................................... 25 Unit functions ................................................................... 25 Main features ...............................................................................................
English For your safety Operating instructions for users KMR 1550 B Before you use this machine for the first time, please read the following: – these operating instructions – the enclosed leaflet Safety Information No. 5.956-250. Make sure that all information contained therein is complied with. Explosion hazard while refuelling! n Do not fill up with fuel – in an enclosed space – while the engine is running. n Do not smoke while refuelling the vehicle. n Fuel expands as it becomes warmer.
KMR 1550 B On behalf of the environment Operating instructions for users English Caution, environmental hazard due to exhausted batteries! Exhausted batteries should not be treated as domestic refuse. Make sure that are disposed of in an environmentally appropriate manner. Caution, environmental hazard due to engine oil or hydraulic fluid! After you have changed the engine oil or hydraulic fluid, take the waste product to a recognised collection point or to a waste disposal company.
English Prior to initial start-up Operating instructions for users KMR 1550 B Unloading procedure Do not use a forklift truck for unloading as it could cause damage to the sweeper. The sweeper has been lashed onto a pallet to ensure that it can be transported safely. The procedure for unpacking the sweeper is as follows: 1. Remove the wooden boards from the pallet and nail them onto the end of the pallet (in front of the sweeper). 2.
KMR 1550 B Operating instructions for users English Operating the sweeper Operating controls 1. 2. 3. 4. 5. 6a. 6b. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Dashboard (see next page for description of operating controls) Lever on steering column (indicators, light, horn, main beam flasher) Bulk waste flap Adjusting r.p.m.
Operating instructions for users English KMR 1550 B All directions given (left/right, front/rear) are as seen from the driver’s seat. Preparing the sweeper for use n n n n n n n n Check the oil level in the engine (see Chapter: “Maintenance”). Check the level of coolant in the radiator (see Chapter: “Maintenance”). Check the amount of fuel in the tank and fill up, if required (see below). Check the level of hydraulic fluid and top up, if required (see Chapter: “Maintenance”).
KMR 1550 B Starting the sweeper Operating instructions for users English Driving the sweeper for the first time Select a location with plenty of space to drive the sweeper initially, until you become familiar with the individual operating controls and their functions. All directions given (left/right, front/rear) are as seen from the driver’s seat. n Sit down on the driver’s seat. The engine cannot be started unless the driver is sitting on the seat (seat contact switch).
Operating instructions for users English Cleaning the filter KMR 1550 B Automatic cleaning n Stop the sweeper and switch off the engine. After the engine has been switched off, the filter is automatically cleaned for approx. 10 seconds. Manual cleaning During the time that the sweeper is actually operating, the filter should be cleaned approx. every 15–30 minutes (depending on the amount of dust). n n n n n Stop the sweeper. Raise the brush roller and side brush. Switch off the vacuum unit 1.
KMR 1550 B Operating instructions for users English n Swivel the waste container downwards. Note: The waste container cannot be fully retracted until it has been tipped all the way back into its original position. Caution while sweeping! Do not sweep up any packing bands, wire or similar objects, as these could cause damage to the sweeping mechanism.
English Operating instructions for users KMR 1550 B Picking up large items (sticks, cans, etc.) Caution! When the bulk waste flap is open, the brush roller can throw out stones or grit towards the front of the sweeper. Make sure when you open the flap that no person, animal or equipment will be endangered. n Press the pedal and the bulk waste flap will open. n Drive over the large items at slow speed with the bulk waste flap open.
Operating instructions for users KMR 1550 B Cleaning and care English Before you carry out any cleaning or general maintenance tasks, n Park the sweeper and switch off the engine. Cleaning the inside of the sweeper: You can clean out the inner parts of the sweeper by blowing them through with compressed air. Cleaning the outside of the sweeper: The outside of the sweeper can be wiped off with a damp cloth. Do not use any aggressive cleaning agents which might cause damage to the plastic components.
English Operating instructions for users KMR 1550 B Caution! Make sure engine cannot be started unintentionally. In order to prevent the engine from being started unintentionally, proceed as follows after you have parked the sweeper. n Pull out the ignition key. n Disconnect the battery at the negative terminal. The necessary maintenance tasks or daily inspections can be carried out with the bonnet raised or the seat tipped forward.
KMR 1550 B Operating instructions for users English Disconnecting the battery n Slide the seat forwards and tilt it towards the front. n Use an open-jawed spanner (size 10 mm) to first of all loosen the clamp on the negative terminal ( – ) and then pull it off. Repeat the procedure for the positive terminal ( + ). n Reconnect the battery by first of all attaching the clamp on the positive terminal ( + ) and then the clamp on the negative terminal ( – ).
Operating instructions for users English KMR 1550 B Checking the engine oil level Caution, Risk of burns from hot exhaust pipe! 1 n n n n Park the sweeper on a level surface. Unscrew the dipstick. Wipe the dipstick clean and screw it back in. Unscrew the dipstick once again. The oil level should be between the “Min” and the “Max” marks. If the oil level is below “Min” – top up with engine oil. If the oil level is above “Max” – drain off excess engine oil. n Screw the dipstick back in again.
Operating instructions for users KMR 1550 B English Replacing the engine oil filter n Drain off the engine oil. n Open the service flap – Unscrew knob and lift off service flap. n Unscrew the engine oil filter. n Rub engine oil into the seal on the new oil filter. n Attach the new engine oil filter by hand and screw it down until the seal just touches the casing. n Tighten the engine oil filter by giving it another half turn. n Pour in new engine oil and check the level.
Operating instructions for users English KMR 1550 B Checking the hydraulic fluid level n n n n n Park the sweeper on a level surface. Clean the area surrounding the dipstick. Pull out the dipstick. Wipe the dipstick clean and re-insert it. Pull out the dipstick once again and read off the oil level. The fluid should be level with the rough section on the dipstick. If the fluid level is too low, this is a sign that there is a leak in the hydraulic system. Do not start the sweeper. Call Customer Service.
Operating instructions for users KMR 1550 B English Safety information which must be observed when handling batteries. Comply with the user instructions and ensure that these are displayed at the charging station. Before the operator carries out any work on batteries, he/she must have received proper instruction from a suitably qualified person. Wear safety goggles and protective clothing when working on batteries. Observe accident prevention regulations, as well as DIN VDE 0510, VDE 0105 Part 1.
Operating instructions for users English KMR 1550 B Replacing sealing strips The sealing strips fulfil an important function. They maintain the partial vacuum in the area surrounding the brushes that is necessary for the sweeper to perform properly. In so doing, they ensure that no dust is expelled while the machine is sweeping. Damaged or worn out sealing strips should be replaced immediately. Direction of travel n Stop the sweeper and turn off the engine.
Operating instructions for users KMR 1550 B English n Remove the next three hand screws and lift off the roller cover. n Pull out the brush roller at the side. Brush roller viewed from above Direction of travel Note: Raise the brush roller unit before inserting a new roller. n Insert a new brush roller, paying attention to correct alignment (see illustration). The projections on the driver must slot into the recesses in the brush roller. n Continue with assembly in reverse order of removal.
English Operating instructions for users KMR 1550 B n Centre the new filter on the driver (1). Push in the thrust bearing (2). Turn the thrust bearing clockwise until the stop and fasten with the screws (3). n Insert the preliminary filter and secure it with the two hand screws. Setting the Sweeping Pattern Note: The main brush can be reset to: – Floating 1: With its deadweight the main brush rests on the floor. – Stationary 2: The sweeping pattern is adjustable at the main brush.
KMR 1550 B Operating instructions for users English Troubleshooting Problem Possible cause Remedy Engine does not start Battery is flat Recharge or replace battery No fuel in tank Refill tank and bleed fuel system Fuel tap is closed Open fuel tap Sweeper does not move Free-wheel arm on hydraulic pump (bypass valve) is in open position Close valve by turning arm through 90º Brushes do not rotate Switch on brush roller lever is stuck Call Customer Service Brush roller or side brush have bee
English Operating instructions for users KMR 1550 B Technical specifications Dimensions and weights Length Width Height Unladen weight (ready for operation) (with 2 side brushes) Max. permissible overall weight Driving and sweeping performance Max. travelling speed Max.
KMR 1550 B 1.948-204.0 1.948-224.0 7.348-242.0 6.961-480.0 6.414-526.0 6.961-481.0 5.047-430.0 6.491-287.0 6.303-135.0 7.312-003.0 6.491-288.0 6.491-250.0 6.961-485.0 6.961-199.0 5.047-429.0 6.310-066.0 6.277-429.0 6.491-220.0 6.961-118.0 6.491-285.0 6.906-083.0 7.312-261.0 7.304-395.0 6.310-066.0 4.620-004.0 6.961-118.0 6.905-623.0 6.961-538.0 4.020-003.0 6.961-103.0 6.961-103.0 4.020-003.0 6.277-429.0 17.02.
KMR 1550 B 1.948-204.0 1.948-224.0 7.651-006.0 6.961-023.0 6.491-583.0 6.491-584.0 7.651-014.0 6.651-371.0 6.961-521.0 7.651-014.0 7.651-006.0 6.961-268.0 6.651-372.0 6.961-412.0 7.651-020.0 7.651-004.0 6.961-008.0 6.633-406.0 4.515-034.0 7.644-007.0 7.644-018.0 7.644-040.0 7.311-012.0 6.961-536.0 4.515-034.0 7.651-014.0 NIK CH TE DE < LA P< OM CR MI >> A V Wa 30 24 6.435-296.0 6.961-016.0 6.654-116.0 6.961-008.0 17.02.
.enoizartsinimmA’lled iretop i noc e ociracni us onocsiga iratamrif I .
)A(Bd 101 :åvintkeffedyl tlåM )A(Bd 301 :åvintkeffedyl tretnaraG .nesledel arf tkamlluf dem go gardppo rette reldnah edengetrednU .remron etdnevna go revitkerid-UE elleutka ed i enevark dem eslemmetssnerevo i re ditlla reniksam etresudorpeires ta terkis ted re katlit enretni monnejG V áìçôñÜñáÐ òçóùöñüììõó òçóçãüëïéîá òïäïèÝì áóßåèóïìñáöÅ )A(Bd 101 :òçóåßð òÞêéôóõïêá çìèÜôó áóßåèçñôåÌ )A(Bd 301 :òçóåßð òÞêéôóõïêá çìèÜôó çíÝìóéëáöóáéÄ .
2122-41 5917 94++: xaF 0-41 5917 94++:.leT nednenniW 94317-D 061 xoB.O.P 04-82 eßartS-rehcräK-derflA smetsyS gninaelC GK.oC & HbmG rehcräK derflA zteM groeG ,renneJ tumtraH ,farG drahnreB .rD :rerhüfstfähcseG BRH ,negnilbiaW thciregretsigeR 4042 ,nednenniW ztiS .HbmG kinhcetsgnuginieR rehcräK .niretfahcslleseG ednetfah hcilnösreP .961 ARH ,negnilbiaW :thciregretsigeR .nednenniW ztiS .tfahcsllesegtidnammoK rehcräK derflA )20/10( 561-759.
