Data Sheet
Points to note
•
IO pins pull high/low resistance:
-
Floating: Hi-Z
-
Strong pull up: 150KΩ
-
Weak pull up: 1MΩ
-
Pull down: 100kΩ
•
P1, P15, P16, P17 do not support FullMUX, and only treated as GPIO.
•
Except TM/ P16 and P17, all GPIO support interrupt and wakeup
•
Single-end ADC pins: P11, P23, P24, P14 and P15
•
Differential ADC pins: P18-P25; P14-P24; P20-P15
•
Two modes available for ADC: bypass and attenuation:
-
By-pass mode
Without attenuation, input range should be 0-0.8V
-
Attenuation mode
Attenuation circuit enable, and input range is 0.3.2V
PRBMD02 DATASHEET 1.10
K-SOLUTION
18