Instructions / Assembly

4 For Professional Technical Support call 1-844-242-2475
NOTICE: Do not reduce size of discharge pipe or hose below 1-1/2” diameter. If discharge is too small, pump will
overheat and fail prematurely.
NOTICE: If a Carbon Monoxide (CO) sensor is installed, it must be at least 15 feet away from battery charger in order
to avoid nuisance CO alarms. Please refer to your CO detector’s installation guidelines for more information.
PRE-INSTALLATION
APPLICATION
 This compact primary and backup pump system is designed for home sump applications. Use this pump only for
pumping water.
 This unit is not designed as a waterfall or fountain pump, or for applications involving salt water or brine! Use with
waterfalls, fountains, salt water or brine will void warranty.
 Do not use where water recirculates.
 Not designed for use as a swimming pool drainer.
TOOLS REQUIRED
MATERIALS REQUIRED (NOT INCLUDED)
NOTE: Parts shown below not to scale.
1-1/2’’ ABS or
PVC Pipe
Thread Tape
1-1/2”
Coupling
ABS or PVC
Cement
(to match the
pipe)
1-1/2” 90°
Elbow
Phillips
Screwdriver
Flathead
Screwdriver
Safety
goggles
Tape
Measure
Channel
Locks
Pipe wrench
Cable
Ties
Hacksaw