Model: SPI03302K SPI05002K SPI07502K SPI10002K OWNER’S MANUAL SUMP PUMP WITH SNAP ACTION SWITCH Questions, problems, missing parts? Before returning to the store call K2 Customer Service 8 a.m. - 5 p.m., EST, Monday-Friday 1-844-242-2475 © 2019 Copyright GP Enterprises Co., Ltd. Rev.
PERFORMANCE GPH of Water @ Total Feet Of Lift Model Max. HP 0 ft. 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. Lift SPI03302K 1/3 3160 2580 2150 1500 100 21 SPI05002K 1/2 4620 4330 3920 3285 2515 1320 26 SPI07502K 3/4 5200 4720 4360 3820 3110 2180 28 SPI10002K 1 5600 5220 4720 4320 3660 2520 32 SAFETY INSTRUCTIONS 1. Do not pump flammable or explosive liquids such as oil, gasoline, kerosene, ethanol, etc. Do not use in the presence of flammable or explosive vapors.
17. Follow all local electrical and safety codes, along with the National Electrical Code (NEC). In addition, all Occupational Safety and Health Administration (OSHA) guidelines must be followed. 18. The motor of this pump has a thermal protector that will trip if the motor becomes too hot. The protector will reset itself once the motor cools down and an acceptable temperature has been reached. The pump may start unexpectedly if it is plugged in. 19.
MATERIALS REQUIRED (NOT INCLUDED) NOTE: Parts shown below not to scale. 1-1/2” to 1-1/4” 1-1/2’’ ABS or adaptor PVC Pipe Thread Tape ABS or PVC 1-1/2” check Cement 1-1/2” 90° valve (to match the Elbow pipe) SPECIFICATIONS Power supply 115V, 60 HZ., 15 Amp Circuit Liquid temp. range 32°F to 95°F (0°- 35°C) Discharge size 1-1/2 in. FNPT Sump basin Min. 10 in. (254 mm) diameter, 14 in. (356 mm) depth NOTE: Do not reduce size of discharge pipe or hose below 1-1/4 in. diameter.
7． Power Supply: Pump is designed for 115V, 60Hz, operation and requires a minimum 15 amp individual branch circuit. The pump is supplied with a 3-wire cord set with grounding-type plug. Do not modify cord or plug. Plug the power into a 115V GFCI power outlet. WARNING: Risk of electric shock. Can shock, burn or kill. Pump should always be electrically grounded to be a suitable electrical ground such as a grounded water pipe or a properly grounded metallic race way, or ground wire system.
Do Do Not When the power is disconnected, inspect the Do not disassemble the motor housing. This motor pump suction screen and remove all debris, has NO repairable internal parts, and disassembly then plug the pump back into the grounded may cause leakage or dangerous electrical wiring (GFCI) outlet. issues. Do not lift up the pump by the power cord. To clean a pump clogged with debris: Unplug the pump from electrical power.
WARRANTY Limited Warranty WHAT THIS WARRANTY COVERS When used and maintained in normal use and in accordance with the Owner’s Manual, your K2 product is warranted against original defects in material and workmanship for at least one year (warranty varies depending on model; see box for specific warranty information) from the date of purchase (the “Warranty Period”).
