Specification

GP Enterprises Co., Ltd,
1436 Brook Drive, Downers Grove, IL 60515 www.K2pumps.com © 2020 GP Enterprises Co., Ltd.
Customer Service: 844-242-2475 K2Spec-23
Performance
Dimensions
Model HP Amps
Discharge
Height(ft)
0 5 10 15 20 25
SPT03301TPK 1/3 4
GPM 40 34 29 25 20 13
GPH 2400 2040 1750 1500 1200 800
Application
Submersible sump pump for typical residential applications
Voltage 115
Hertz 60
Phase Single
RPM 3450RPM
Motor type
Permanent Split Capacitor
(PSC)
Insulation Class B
Circuit requirments 15 AMP
Duty rating Continuous*
Shaft seal Lip seal
Motor Shaft Stainless steel
Upper motor bearing Ball bearing
Lower motor bearing Ball bearing
Cooling Oil cooled
Motor protection
Auto reset thermal overload
protector
*For continuous,the water depth must be at least 6”to prevent the motor
from overheating
Pump Specifications
Discharge size
1" MNPT or 1-1/4" FPT*1-1/2"
MPT(with adapter )"
Cord Length 10'
Cord type SJTW 18AWG/3C, UL list
Pump Housing Reinforced thermoplastic
Pump Base Reinforced thermoplastic
Impeller material Reinforced thermoplastic
Gasket Rubber
Solids handling 1/8" spherical
Liquid temp.range 32°-95°F
Operation Automatic
Fasteners Stainless steel
Automatic Switch Specifications
Type Wide Angle Tethered
Switch on point 13.4"
Switch off point 5.1"
Material Reinforced thermoplastic
Cord Length 10'
Cord type SJOW 18AWG/2C, UL list
Sump basin
Min. 14 in. (356 mm) diameter,
18 in. (457 mm) depth