Owner's Manual
Table Of Contents
- Owner's Manual
- Table of Contents
- Mounting and Powering the Platinum100
- Wake-Up Sequence
- Receiving Alerts
- Radar Alert Sequence
- Laser Alert Sequence
- Laser Defuser Compatible (sold separately)
- Laser Defuser Settings (if equipped)
- Manual Laser Defuser Shut Down During a Police Laser Encounter (if equipped)
- Alerts from Non-Police Signals
- K-Band Filter
- Traffic Sensor Filter (factory default off)
- MultaRadar (MRCD/CT) Photo Radar (factory default off)
- Auto Volume (factory default on)
- OLED DISPLAY Overview
- Special Features
- Controls Overview
- Customizable Settings
- Add-On Options
- Wireless Remote Control Functions
- Troubleshooting Guide
- Warranty/Guarantees
- Our Promise
- Letter From the President
- Warranty
12
Dim Settings
Press and release button to adjust and automatically
save display brightness to accommodate various driving
environments.
Six Display Brightness Options:
1. “Day”- Brightest display setting.
2. “Dusk”- Medium display setting (factory default).
3. “Night”- Dimmest display setting.
4. “Auto”-Display adjusts automatically from three sec-
onds in “Day,” three seconds in “Dusk,” and the duration
of the alert in “Night”.
5. “Stealth”-Display is dark with a single dot that scans the
bottom of the display. Upon receiving a radar or laser
signal, the display illuminates to medium brightness for
the duration of the alert and then returns to dark when
the alert ends.
6. “Off”-No display, still receive full audio alerts, reverts to
“Auto” upon next wake-up.
DIM
MENU
B