Owner's Manual

12 13
Mark to Alert
The Mark to Alert function saves specific GPS locations to create a
personal database of areas where increased awareness is desired, such
as school zones, speed traps, or red light cameras.
• Press and release button when you want to mark a location
for alert.
• Voice announces, “Marked to Alert”.
In the future you will be alerted as follows:
When you arrive… You will hear…
...within a radius of 1500 feet of a ...“Approaching Marked Location”
marked location and the alert LED(s) will flash twice
...at a marked location ...a single “Bing” tone and the alert
LED(s) will flash once
MA
To remove a previously marked location from your database:
• Press and release button while in the marked location.
• Voice announces, “Marked Location Removed”.
To remove all alert locations:
• Press and hold button for 10 seconds at any time.
• Voice announces, “All Alert Locations Cleared”.
MA
MA
Speed Monitor
Speed Monitor alerts you when a preselected speed is exceeded.
Speed Monitor can be set to any speed between 40-100 mph in 5
mph increments or 60-160 kph in 10 kph increments. The factory
default setting for Speed Monitor is “Off”.
Activating/Adjusting Speed Monitor
• Press and hold button for three seconds until the voice
announces, “Speed Monitor”.
• Press and release or button to adjust the Speed Monitor
speed setting. When you have chosen your desired Speed Monitor
setting, stop scrolling and the voice will announce, “Speed Moni-
tor Set”.
When driving and the Speed Monitor speed is exceeded:
• The K40 system will emit a continuous “Bing Bong” tone and the
alert LED(s) will flash.
• The alerts will continue until the vehicle’s speed is reduced to
below the Speed Monitor speed setting.
+
-
Customizable Settings
To change the factory preset features and customize your K40
system for the way you drive, follow the instructions below or
call a K40 Consultant at 800.323.5608.
To change settings:
• Press and release button to enter the MENU.
The voice will announce “Menu”, and then announce the first
customizable option and its current status.
• Press and release button to scroll through the options
until you reach the feature you want to change.
• Press and release or button to change an existing
setting. Voice will announce change.
To save your settings and exit:
• Press and hold button for three seconds, or wait 10
seconds and the system will automatically save your preferences.
• The voice will announce “Exit”.
MENU
MENU
+
-
MENU
CITY
HWY
*PLATINUM 360_200 OWNERS .qxp_Layout 1 3/23/20 3:13 PM Page 10