K40 Consult Don’t like to read manuals? Call our experienced K40 Consultants. We’ll explain the whole thing. 800.323.5608 K40 ELECTRONICS 600 Tollgate Rd., Suite A Elgin, IL 60123 www.K40.
Table of Contents Wake-up Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Receiving Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 Radar Alert Sequence . . . . . . . . . . . . . . . . . . . . . . . . . .5 Laser Alert Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Laser Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Non-Police Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wake-up Sequence (using factory default settings) Your K40 RL360i/RL200i will be ready for use following this automatic wake-up sequence: 1. Start your vehicle – The K40 is designed to turn on automatically every time your vehicle is started. 2. Listen for Wake-Up Sequence – Both front and rear alert lights in your dash will flash (K40 RL200i systems have one alert light). The voice will announce “K40 Scan, Active” then you will hear alerts for all bands.
Receiving Alerts The K40 RL360i/RL200i provides a combination of audio and visual alerts to warn you when radar is detected. Radar Alert Sequence Your K40 RL360i/RL200i detects all industry standard police radar bands (X, K and Ka band). When a signal is detected: • A voice alerts which band was identified. (This assumes the factory default “Voice ON” setting has not been changed.) • The K40 RL360i will announce the direction of the signal’s source, either front or rear, along with the band detected.
Laser Settings The Laser Defuser g5 can be configured to one of three different operational settings: Laser Settings Constant Transmit Pulse Transmit Description Upon receiving a laser signal, the Laser Defuser g5 will continually transmit a jamming signal for the duration of the laser encounter. This is the factory default setting. Upon receiving a laser signal, the Laser Defuser g5 will transmit a jamming signal for 10 seconds and then cease firing for the duration of that encounter.
Special Features/Functions DIM DIM • Press and release on the remote control to adjust LED brightness to accommodate various driving environments. Your setting will automatically be saved with the exception of “Off”. The “Off” setting will revert to “Auto” upon system wake-up. The 5 options include: 1. “Day” (Bright) 2. “Dusk” (Medium / factory default) 3. “Night”(Dim) 4. "Auto” (LED’s adjust automatically from 5 seconds in “Day”, 5 seconds in “Dusk” and the duration of the alert in “Night”) 5.
Quiet Ride The Quiet Ride function will automatically silence all radar / laser alerts when traveling under a speed setting of your choice between 5 and 75 MPH in 5 MPH increments. Visual alerts are unaffected by Quiet Ride settings. The factory default setting for Quiet Ride is “Off”. Activating / Adjusting Quiet Ride and release QUIET on the remote control to activate the RIDE Quiet Ride menu. Quiet Ride will announce the current setting e.g.
Mark to Alert The Mark to Alert function allows you to add specific GPS locations to your personal database, alerting you to any point of interest you choose, such as construction zones, speed traps or red light cameras. • Press and release MA on the remote control when you want to mark a location for alert. A voice announces “Marked to Alert”. In the future, you will be alerted as follows: • When you arrive… You will hear a… …within a radius of 1500 feet of the marked location ...
Speed Monitor The Speed Monitor function alerts the driver when a pre-selected speed is exceeded, great for young drivers or accidental speeders. The Speed Monitor can be set to any speed between 40-100 MPH in 5 MPH increments. The factory default setting for Speed Monitor is “Off”. Activating / Adjusting Speed Monitor • Press and release SM on the remote control to activate the Speed Monitor menu. Speed Monitor will announce the current setting e.g.
Customizable Settings To change the factory preset features and optimize your K40 RL360i/RL200i for the way you drive, follow the instructions below, or call a K40 Consultant at 800.323.5608. Be assured your call will be answered immediately and personally. To change settings: • • • Press and release MENU to enter Menu Mode. The voice will announce “Menu” and then announce the first customizable option and its current status.
Customizable Settings Default Setting Menu Options (in sequential order) 1 Voice Type 2 Audible Voice (voice confirmations) RL200i System RL360i System Description “Voice Female” “Voice Female” Choose male or female voice for audio alerts. ”Voice On“ “Voice On” For all initial audio alerts: “Voice On” uses voice; “Voice Off” uses tones only. 3 Wake-Up “Wake-Up Long”“Wake-Up Long” Controls length of wake-up sequence after powering on unit. “Wake-Up Long” is standard 5second sequence.
Customizable Settings Default Setting Menu Options (in sequential order) 9 Front Ka-Band (voice confirmations) RL200i System ”Ka-Band On“ “Front Ka-Band On” 10 Rear Radar Description Enables the detection of Ka-Band radar from front receiver. “Off” disables this detection. N/A “Rear Radar On” Allows user option to turn off rear radar, important when traveling in states or countries where radar detectors are illegal. N/A “Rear X-Band On” Enables the detection of X-Band radar from rear receiver.
Remote Control POWER – Turn the K40 RL360i/RL200i Radar System on or off. – Adjust LED DIM brightness. (page 7) MENU – Press to enter customizable menu settings. (pages 11-13) UP – Press to in- + SM SPEED MONITOR Press to confirm speed setting and enter Speed Monitor menu. (page 10) MA MARK TO ALERT Press to “mark” specific locations for alert. (page 9) QUIET RIDE MUTE – Press to mute audio alerts for 30 seconds, or the duration of the alert.
OPEN To Change Remote Battery: Unlock and remove battery door by turning the cover counter-clockwise as shown. To Use Supplied Visor Clip: Insert by placing the clip in the back of the remote control as shown. Press firmly until it clicks. Insert battery with + symbol side facing the + symbol side of the battery door cover. Requires use of a CR2032 cell battery.
Register your K40 RL360i/RL200i today at www.K40.com to activate your guarantees: Guaranteed immunity from speeding tickets If you get a radar speeding ticket within one year of purchase, we’ll reimburse you for the cost of the speeding ticket.* Guaranteed performance If your K40 Radar Detection System does not outperform any other radar detector you’ve owned, return it within 30 days for full product credit.
Product subject to one or more of the following patents: U.S. Patents 7,298,248 B2 5,001,777 RE39,038 RE40,653 RE41,905 Other patents pending FCC IDS: W75-M2K-Y24 W75-RL-RCU II This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Our Promise TO EXCEED... Customer expectations through the pride and dedication of our strong team of caring and talented employees by being the “Model of Excellence” in the entire industry on every level — from innovative product design and flawless manufacturing to knowledgeable sales and total customer service. TO PROVIDE...
Letter From the President Thank you very much for your recent purchase of the most progressive radar and laser solution available on the market today. Our ultimate goal is that you, our valued customer, is empowered with peace of mind and unparalleled radar protection. Because we care about you, we’re still the only company that stands behind every product with a comprehensive speeding ticket guarantee.
