Owners Manual

5
The K40 RL360i/RL200i provides a combination of audio and visual
alerts to warn you when radar is detected.
Radar Alert Sequence
Your K40 RL360i/RL200i detects all industry standard police radar
bands (X, K and Ka band). When a signal is detected:
• A voice alerts which band was identified. (This assumes the factory
default “Voice ON” setting has not been changed.)
• The K40 RL360i will announce the direction of the signal’s source,
either front or rear, along with the band detected. K40 RL200i
Radar Systems will only announce the band detected.
• Signal strength and proximity to the radar source will be identified
as a series of geiger-counter like tones. The faster the tone pattern,
the closer you are to the source. Each band has its own distinctive
tone.
Laser Alert Sequence
(only for K40 RL360i/RL200i Systems that include the Laser Defuser g5)
When the K40 RL360i/RL200i detects a laser signal:
• A voice announces “Laser.” (This assumes the factory default
“Voice ON” setting has not been changed.)
• You will then hear a distinct and urgent audio tone.
• LEDs will pulse rapidly.
Receiving Alerts