Manual

9
Mark to Mute
The Mark to Mute function allows you to mute any radar band / laser
alert from a non-police source (i.e. an automatic door) in a specific
GPS location.
Using Mark to Mute
• Press and release to mute a specific radar band / laser alert.*
• A voice announces that a specific radar band / laser alert has been
muted (i.e. “K Muted”).
• You will no longer receive audible alerts for the muted radar band /
laser alert when within a 1,500 ft. radius of the muted location.
• You will still receive visual alerts from the alert LED(s).
• All other radar bands / laser alerts remain unaffected.
To remove a previously muted radar band / laser alert from
your database:
• Press and release while in the marked location.
• Voice announces that a specific radar band / laser alert has been
removed (i.e. “K Muted Removed”).
To remove all stored muted radar bands / laser alerts:
• Press and hold for 10 seconds at any time.
• Voice announces, “All Muted Locations Cleared.”
*A radar or laser signal must be present in order to mark a location for mute.
MM
MM
MM