K40 Consult Don’t like to read manuals? Call our experienced K40 Consultants. We’ll explain the whole thing. 800.323.5608 K40 ELECTRONICS 600 Tollgate Rd., Suite A Elgin, IL 60123 K40.
Table of Contents Wake-Up Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Receiving Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 Radar Alert Sequence . . . . . . . . . . . . . . . . . . . . . . . . . .5 Laser Alert Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Laser Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Non-Police Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wake-Up Sequence (using factory default settings) Your K40 system will be ready for use following this automatic wakeup sequence: 1. Start your vehicle – Your K40 system is designed to turn on automatically every time your vehicle is started. 2. Listen for Wake-Up Sequence – Both front and rear alert lights in your dash will flash (front only radar receiver systems have one alert light). The voice will announce, “K40 Scan, Active,” then you will hear alerts for all bands.
Receiving Alerts Your K40 system provides a combination of audio and visual alerts to warn you when radar is detected. Radar Alert Sequence Your K40 system detects all North American police radar bands (X, K, and Ka-Band). When a signal is detected: • A voice alerts which band was identified. (This assumes the factory default “Voice On” setting has not been changed.) • The K40 RL360di will announce the direction of the signal’s source, either front or rear, along with the band detected.
Laser Settings The Laser Defuser can be configured to one of three different operational settings: Laser Settings Description Recommended Use Constant Transmit Upon receiving a laser signal, the Laser Defuser will continuously transmit a jamming signal for the duration of the laser encounter. This is the factory default setting. •Gives the driver more time to decelerate.
Special Features / Functions DIM DIM • Press and release on the remote control to adjust LED brightness to accommodate various driving environments. Your setting will automatically be saved with the exception of “Off.” The “Off” setting will revert to “Night” upon system wake-up. The 5 options include: 1. “Day” (Bright) 2. “Dusk” (Medium / factory default) 3. “Night”(Dim) 4. “Auto” (LED(s) adjust automatically from 3 seconds in “Day,” 3 seconds in “Dusk,” and the duration of the alert in “Night”) 5.
Quiet Ride The Quiet Ride function will automatically silence all radar / laser alerts when traveling under a speed setting of your choice between 5-75 mph in 5 mph increments or 10-120 kph in 10 kph increments. Visual alerts are unaffected by Quiet Ride settings. The factory default setting for Quiet Ride is “Off.” Activating / Adjusting Quiet Ride and release QUIET on the remote control to activate the RIDE Quiet Ride menu. Voice will announce the current setting e.g.
Mark to Mute The Mark to Mute function allows you to mute any radar band / laser alert from a non-police source (i.e. an automatic door) in a specific GPS location. Using Mark to Mute MM • Press and release to mute a specific radar band / laser alert.* • A voice announces that a specific radar band / laser alert has been muted (i.e. “K Muted”). • You will no longer receive audible alerts for the muted radar band / laser alert when within a 1,500 ft. radius of the muted location.
Mark to Alert The Mark to Alert function allows you to add specific GPS locations to your personal database, alerting you to any point of interest you choose (such as school zones, speed traps, or red light cameras). • Press and release MA on the remote control when you want to mark a location for alert. Voice will announce, “Marked to Alert.” In the future, you will be alerted as follows: • When you arrive… You will hear… …within a radius of 750 feet of a marked location ...
Activating / Adjusting Speed Monitor • • Press and release MENU until voice announces, “Speed Monitor.” Press and release + or - to adjust the Speed Monitor speed setting. When you have chosen your desired Speed Monitor setting, stop scrolling and voice will announce, “Exit.” When driving and the Speed Monitor speed is exceeded: • Your K40 system will emit a continuous “Bing Bong” tone and the LED(s) will remain lit.
Customizable Settings Default Setting Menu Options (in sequential order) 1 Voice Type 2 Audible Voice (voice confirmations) RL200di System RL360di System Description “Female Voice” “Female Voice” Choose male or female voice for audio alerts. ”Voice On“ “Voice On” For all initial audio alerts: “Voice On” uses voice; “Voice Off” uses tones only. 3 Wake-Up “Wake-Up Long”“Wake-Up Long” Controls length of startup sequence after powering on unit. “Wake-Up Long” is standard fivesecond sequence.
Customizable Settings Default Setting Menu Options (in sequential order) 11 Front Ka-Band (voice confirmations) RL200di System ”Ka-Band On“ “Front Ka-Band On” 12 Rear Radar Description Enables the detection of Ka-Band radar from front receiver. “Off” disables this detection. N/A “Rear Radar On” Allows user to turn off rear radar (important when traveling in states or countries where radar detectors are illegal). N/A “Rear X-Band On” Enables the detection of X-Band radar from rear receiver.
Remote Control POWER Press and release to turn the K40 RL360di / RL200di system on or off. DIM MENU Press to enter customizable menu settings. (pages 11-13) Adjust LED brightness. (page 7) + UP Press to increase volume. Use to scroll and change menu options. (pages 8 & 11) MM MARK TO MUTE Press to mute a specific radar band / laser alert in a location. (page 9) MUTE Press to mute audio alerts for 30 seconds or the duration of the alert. Press and hold for 3 seconds to engage extended mute.
OPEN To Change Remote Battery: Unlock and remove battery door by turning the cover counterclockwise as shown. To Use Supplied Visor Clip: Insert the supplied clip into the back of the remote control as shown. Press firmly until it clicks. Insert battery with + symbol side facing the + symbol side of the battery door cover. Requires use of a CR2032 cell battery.
Register your K40 system today to activate your guarantees: Guaranteed immunity from speeding tickets If you get a radar speeding ticket within one year of purchase, we’ll reimburse you for the full cost of the ticket.* Guaranteed performance If your K40 system does not outperform any other radar detector you’ve owned, return it within 30 days for a full product credit. Guaranteed from theft If your K40 RL360di / RL200di is ever stolen, we’ll replace the stolen product.
Product subject to one or more of the following patents: U.S. Patents 7,298,248 B2 5,001,777 RE39,038 RE40,653 RE41,905 Other patents pending FCC IDS: W75-M2K-Y24 W75-RL-RCU II This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Our Promise TO EXCEED... Customer expectations through the pride and dedication of our strong team of caring and talented employees by being the “Model of Excellence” in the entire industry on every level — from innovative product design and flawless manufacturing to knowledgeable sales and total customer service. TO PROVIDE...
Letter From the President Thank you very much for your recent purchase of the most progressive radar and laser solution available on the market today. Our ultimate goal is that you, our valued customer, is empowered with peace of mind and unparalleled radar protection. Because we care about you, we’re still the only company that stands behind every product with a comprehensive speeding ticket guarantee.
44878 1/18
