Programming Instructions

Programming
Master and User PIN code have 4-10 digits, the default Master PIN code is [12345678]. Please change it prior to programming of the lock.
Status Indicators
1#. Unlocked or setting succeed
2#. Locked or setting failed
3#. Low battery Warning
Battery
cover
Thumb turn
Status indicator(Red) 2#
Status indicator(Green) 1#
Cylinder(optional)
Touch screen keypad
Status indicator(Battery) 3#
Reset button
Micro USB
power port
Reboot button
The default Master PIN Code must be changed after installing. The Master PIN Code will also operate the lock in Away Mode.
Auto Re-lock:
After successful PIN Code entry and the unit unlocks, it will automatically re-lock after 30 seconds. This feature is disabled in default
setting. Could be set up in Master Mode or through Alfred APP.
Manual Mode:
Auto Re-lock function could be adjusted to Manual Mode. In Manual Mode the lock could be locked only by pressing any key for 2 seconds from outside
or using thumb turn from inside.
One Touch Re-lock:
When the bolt is retracted, activating the keypad and press any key for 2 seconds will extend the bolt(during Auto Re-Lock duration or when Manual
Mode is enabled)
Shutdown Time:
The lock will shutdown for a default of 5 mins and not allow operation after the wrong code entry limit(10 times) has been met. When the unit is in
Shutdown, the screen will flash when you are trying to use keypad.
Away Mode:
This feature is enabled by the Master PIN Code in Master Mode or Alfred APP, it restricts all user PIN code access, except Master PIN code and APP
access. This feature will disabled automatically after entering Master PIN Code from outside or using APP. If someone unlock the unit by using thumb
turn or key override, the lock will alarm for 1 min and send a message to user’s hand-held device for warning(requires wireless module).
Silent Mode:
Enabling Silent Mode shuts off the code confirmation tone playback for use in quiet areas. Silent mode is selected in the Voice setting of Master Mode or
Alfred APP.
Status LED:
Located on outside escutcheon.
User PIN code:
The User PIN code operates the lock. Maximum number of user PIN codes is 20.
Definitions
Master Mode:
The Master Mode could be entered by entering “**+Master PIN Code+#” to programming the lock.
Master PIN code:
The Master PIN Code is used for programming and for feature settings.
3/9
2/9