QUICK START GUIDE Solar Dual Linkage PTZ Battery Camera (Ultra Low Power)
1.
.Application Scenarios 2.Product Overview No power supply required, please move the solar panel toward the maximum sunlight orientation. Install the camera according to the environment, wide-angle lens for monitoring overall situation, PTZ lens for watching details. You can view and control the two displays at the same time that realize wiring-free, one machine in multi-degrees of no dead angle monitoring.
.Boot Instructions Install the antennas in sequence, Take notice of installing the corresponding A and B antenna. 1 5.Download APP & Register 2 For a better use, charge the camera preferably for 10 hours before use. 3 Connect the solar charging cable, switch on the power, power button is self-locking switch, one press to turn on the power, one more press to turn off the power, after switch on the power, Tapping and holding the reset button for 5 seconds, ready to match the network. 1.
6.Configuration and Addition of WiFi Devices 3. Add Camera 4. Choose Network Type 5. Confirm Camera Status 6. Enter Network Information 7.Scan QR code to Add Devices Run the app, click the upper right corner “ ” to add. Select the WiFi option on the left. Follow the prompts to determine whether the indicator light on the front of the camera is flashing alternately in red and blue. If the indicator light flashes red and blue alternately, just click "To connect".
7.APP Homepage Instructions 8.Homepage Function 9.Sharing Function 10.Do not Disturb Mode 11.Viewing the Event List 12.Cloud Storage Service 13.Manage Account Information Introduction of camera's functions in After your family has registered the account, the home page. click At the top of the page Enter the Do Not Disturb mode setting. When PIR is triggered, you will get the notifications in the real time. If you do not want to receive notifications, you can turn on Do Not Disturb mode.
9.Control Instructions 8.Real-time Monitoring and Play back 14.Real-time Monitoring 15.Video Playback of Memory Card Click the screen on the homepage to access real-time monitoring Click the video playback button on the homepage of the pull-up control menu to enter playback, select memory card playback. 16:15 Click the video playback button on the homepage of the pull-up control menu to enter playback, select cloud storage playback. 4G Setting Alarm manually Return CAMERA Live: 1 16.
10.Intelligent Tracking and Linkage 11.System Settings 18.Intelligent Tracking and Linkage In the detection settings, choose to Turn on or Turn off humanoid tracking 16:15 4G 16:15 4G Camera CAMERA Live: 1 Live: 1 123KB/s 123KB/s Linkage Calibration: Due to misoperation or manual adjustment of the camera, there will be errors in the positioning of the humanoid tracked by the PTZ camera. The calibration function can be used to re-calibrate the positioning linkage of the upper and lower lenses.
22.Memory card Settings 23.Alert Push Settings 24.Detection Settings 25.Power Consumption 26.Sound & light settings Click Click Click Click to enter power management, select the use mode according to the environment and user needs, which can better manage the use of the battery. Click to enter memory card settings, you can check its usage status and format.
11.Wall Mounted Installation Instructions 12.Ceiling Mounted Installation Instructions 2 Connect the solar panel charging port. A 1 Fix the solar panel and the bracket together by hexagonal wrench, and adjust it to the maximum sunlight orientation according to the installation environment. 3 Use screws to secure the iron wall bracket on the wall, hang the camera from top to bottom, finally lock the tamper-proof screws below. 1 Unscrew the fixing screw at A, and then pull out the upper wall bracket.
13..Commissioning Instructions 14.Technical Analysis 1. Q:Why doesn't the Wi-Fi name appear when I connect to Wi-Fi? A: On IOS devices with iOS13 and above, you need to turn on the "location permission" for the app in the system settings and change it to "allow when using". After adjusting the tilt angle of the wide-angle camera, tighten the thumbscrew to fix the lens position. According to monitoring requirements, manually adjust the up and down tilt angle of the wide-angle camera.
Technical Analysis Technical Analysis 5. Q:How to check the video playback? A: Click the video playback button on the homepage of the pull-up control menu ,select memory card playback or cloud storage playback. 12. Q: How many accounts can a camera share with? A: 8 accounts. 6. Q: Do I need to always connect my mobile device to any WiFi if I'd like to watch the videos? A:No, you don't. You can use WLAN or Cellular Data to watch them only if your camera is well connected to your router's WiFi. 13.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.