Quick Start Guide

6.Configuration and Addition of WiFi Devices
Run the app, click the upper right
corner “ ” to add.
3. Add Camera
Select the WiFi option on the left.
4. Choose Network Type
6. Enter Network Information
Click Switch WiFi to select your home WiFi SSID,
and enter the password below. (In order to avoid
input errors, after the input is completed, you can
click the eye pattern on the right to check whether
the password is entered correctly).
7.Scan QR code to Add Devices
Scan the QR code of the camera body, and click "connect" after hearing the mobile
phone scan prompt voice. The APP and the camera will be automatically connected
to network.".
5. Confirm Camera Status
If t he indicator does not flash alternately
be tween red and blue, please check
wh ether the camera is turned on, and
pr ess the reset button again for 5 seconds.
Follow the prompts to determine whether the indicator
light on the front of the camera is flashing alternately
in red and blue. If the indicator light flashes red and blue
alternately, just click "To connect".
Wh en the devi ce is connected and waiting for the
ne twork con figuration, the indicator light flashes
al ternately in red and blue.
Enter the WiFi SSID and
password below
Attention:
5G is not currently supported
找不到 机⼆维码 ，请点 击⽣成
CAM ERA NID
USE NIVIEW APP SCAN QR CODE
NE XT
Notice: Versions below iOS11 require manual connection to the camera hotspot network. Please follow
the APP prompts, go to the phone settings interface to connect to the hotspot starting with
NIVIEW_XXXXX, then return to the APP interface to configure the network
.