User's Manual

TIMER AND REMOTE INTERACTION
Your timer includes a remote control with temporary override:
• Temporary override ON: turns the timer ON for desired settings (2, 4, 6 or 8 Hours).
Please note if your timer dial position is preset it will restart from ‘0’ and count until it
reaches the time set on the dial refer.
• Temporary override OFF: turns the timer OFF for 12 hours before switching control back
to the timer.
Timer Dial position Using the Remote
OFF Press the remote and the timer will turn OFF
ON Press the remote the timer will turn ON
DUSK-DAWN
2, 4, 6 or 8 HRS
Press the remote and it will go into a manual
restart mode. The timer will restart from ‘0’ and
count until it reaches the time set on the dial, or
dawn time. Please refer to examples below for
further explanation.
Examples
 Timer set to ON or OFF REMOTE ON – OUTPUT ON; REMOTE OFF - OUTPUT
OFF
 Timer set to DUSK-DAWN
When DUSK = 6:00 PM and DAWN = 5:00 AM
If at 4 :00 PM REMOTE activated to ON --> OUTPUT ON and stay ON until 5:00 AM.
Next day ON at DUSK , OFF at – DAWN
If at 10 :00 PM REMOTE activated to OFF --> OUTPUT OFF = 10:00 PM, and stays
OFF until DAWN next day. Next day ON at DUSK , OFF at DAWN
 If TIMER setting is 2 HOURS (or 4,6,8 HOURS and so on)
DAY OR NIGHT TIME
REMOTE ON --> OUTPUT ON 2 HOURS (4,6.8 HOURS) Then OFF
When DUSK --> OUTPUT ON 2 HOURS (4,6,8 HOURS) Then OFF