User's Manual

ManualsBrandsKaba Il ManualsElectronicsRFID OPERATED DOOR LOCK USED TO CONTROL ACCESS TO SECURED AREAS

PK3616_08_12 • CONFIDANT INSTALLATION GUIDE

IMPORTANT: Wear Safety glasses before starting the replacement of parts.

Confidant RFID

Installation Instructions (Kit 1)

Installation Steps:

1. Tools Needed ................................................................3

2. Check for Correct Inventory Kit .................................................4

Party Rose Mount (Key Override) .................................................4

Party Rose Mount (No Key Override) ...............................................5

Party Back Plate Mount (Key Override) .............................................6

Party Back Plate Mount (No Key Override) ..........................................7

3. Remove Battery Holder ........................................................8

4. Align Posts with Mortise .......................................................8

5. Spindle Selection & Installation ..................................................9

6. Install Outside Lever ..........................................................10

7. Install Lock on Door (Options) ..................................................11

Back Plate Mount (Key Override) ...................................................11

Rose Mount (Key Override) ........................................................11

Back Plate Mount (No Key Override) ................................................12

Rose Mount (No Key Override) .....................................................12

8. Plug Battery Holder ..........................................................13

9. Test Lock Functionality .......................................................13

10. Program Lock - With Jack Cable ................................................14

11. Install Battery Door ..........................................................14

Model: Confidant RFID

IC: 4652A-CRFID

FCCID: Q8SCONFIDANT-RFID

Regulatory Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications of this product, not approved by manufacturer will void the user’s authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may

not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux

deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélec-

trique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Made in Canada

2012 Kaba Lodging Systems. All trademarks and registered trademarks are the property of their respective owners.