Instructions / Assembly

10
Figure 10
Figure 11
10. Open the door, place the gas cylinder into the Gas Cylinder Support (L), connect the regulator, screw the black
handle clockwise to tighten, turn the black handle counterclockwise to remove. The hose must point down. The
knob on the control panel is turned all the way to the “OFF” position when the fire pit is NOT in use(see Figure
10).
11. Secure the gas cylinder by tightening clockwise the butterfly screw found on the Gas Cylinder Support (L), so
that the gas cylinder cannot move from side to side or fall down. Close the Door (D), cover the fire pit with the
Weather Cover (N) when not in use to protect it from the elements or when fire pit is cool COMPLETELY after
the use (see Figure 11).
black handle
N
L
L
D