Instructions / Assembly

11
Figure 12
Figure 13
Figure 14
STOP STOP
NATURAL GAS CONVERSION
Natural gas conversion must be performed only by natural gas provider or service company.
1. Disconnect the propane hose from the gas valve (see Figure 12).
2. Unscrew and disconnect the propane orifice from the bellows (see Figure 13). Propane orifice
(2.21 mm diameter size) is painted with red mark.
3. Replace the propane orifice with the natural gas orifice, screw the natural gas orifice with the bellows
tightly,then connect and tighten the natural gas orifice with inlet tube (see Figure 14). Natural gas orifice
(4.18 mm diameter size) is painted with black mark.
propane orifice
bellows
propane orifice
bellows
inlet tube
bellows
natural gas orifice
propane hose
gas valve