Instructions / Assembly

Figure 7
D
A
B
C
Figure 5
Figure 6
black handle
Figure 3
Figure 4
3. Place the gas cylinder into the cylinder holder. Secure the cylinder by tightening clockwise the butterfly screw
found on the cylinder holder (see Figure 3), so that the cylinder cannot move from side to side or fall down.
Connect the regulator, screw the black handle (see Figure 4) clockwise to tighten, turn the black handle counter
clockwise to remove. The knob on the control panel is turned all the way to the “OFF” position when the fire pit is
NOT in use.
4. Attach the door (B) with fire table (A) tenderly (see Figure 5). Place the Lid (C) onto the fire bowl when not in use
to protect it from the elements or when fire pit is cool COMPLETELY after the use (see Figure 6).
WARNING: Allow 30 minutes after use for fire pit to cool down before placing the lid to prevent scalding.
5. Cover the fire pit with the outdoor weather cover (D) when not in use to protect it from the elements or when fire
pit is cool COMPLETELY after the use, (see Figure 7).
06