Use and Care Manual
Table Of Contents
- 6. Display function
- TIME：0:00 – 99.59(MIN)
- DISTANCE: 0.00 – 99.0(MILE)
- CALORIES: 0.0 – 990 (KC)
- SPEED: 0.6 – 6.2(MILE/H)
- 10. (FAT) Body Fat Test
- 11. Others
- 11.3. Countdown time, countdown calorie and countdown distance can only be set up for one of them. The last time setting will be implemented. The parameter set will be counted backwards while other parameters will be counted forwards.
- 11.4. The standard calorie is 30kcal/km.
- 11.5. The acceleration is 0.5Km/S and the deceleration is 0.5Km/S.
12
1. Console face:
2. Start
Normal startup after 5s counting backwards.
3. Number of programs
P1~P12 automatic programs
4. Safety lock function
Removing the safety lock, “E7” will be immediately displayed, the treadmill will stop rapidly
and alarm as “Bi-Bi-Bi”. Installing the safety lock, the electronic meter will be reset after 2s of
data display.
5. Key function
5.1. START/STOP:
“START” is start key, press “START” when the treadmill is in stop state, the treadmill will be
started and run, with the speed displayed as “0.6”. “STOP” is stop key, press “STOP” when
the treadmill is running, and all data will be reset, the system will return back to manual mode
after stable stop of the treadmill.
The two keys are on the handle.
5.2. Program key:
“PROGAM” is the program key. In standby state, press PROGRAM to select manual mode,
auto program P1 – P12; manual mode is the default one under which the default speed is
0.6mile/h and the maximum running speed is 6.2mile/h.
5.3. Mode key:
“MODE” is mode key. In standby state, press MODE key can select 3 kinds of countdown
operation mode from H-1 to H-3. H-1 is the time countdown mode; H-2 is the distance
countdown mode; H-3 is the calorie countdown mode; SPEED+ and SPEED- will be used to