Use and Care Manual
Table Of Contents
- 6. Display function
- TIME：0:00 – 99.59(MIN)
- DISTANCE: 0.00 – 99.0(MILE)
- CALORIES: 0.0 – 990 (KC)
- SPEED: 0.6 – 6.2(MILE/H)
- 10. (FAT) Body Fat Test
- 11. Others
- 11.3. Countdown time, countdown calorie and countdown distance can only be set up for one of them. The last time setting will be implemented. The parameter set will be counted backwards while other parameters will be counted forwards.
- 11.4. The standard calorie is 30kcal/km.
- 11.5. The acceleration is 0.5Km/S and the deceleration is 0.5Km/S.
15
11. Others
11.1 After the operation completion of a countdown parameter, END will be displayed. The
system will alarm for 0.5s at the interval of 2s until the steady stop of the treadmill. Then, the
system will return back to the manual mode.
11.2. Circular setting is supported for parameter setting. For example, the time setting range
is 5:00—99:00; to press “+” when the time displayed is 99:00, 5:00 will be displayed, and so
on. “+” and “-” can be used for increase and decrease.
11.3. Countdown time, countdown calorie and countdown distance can only be set up for one
of them. The last time setting will be implemented. The parameter set will be counted
backwards while other parameters will be counted forwards.
11.4. The standard calorie is 30kcal/km.
11.5. The acceleration is 0.5Km/S and the deceleration is 0.5Km/S.
12. Meanings of error message codes
Error code
Failure description
Solutions