Use and Care Manual

4
Step 3
1). Connect the computer middle line (63) with computer up line (62).
2). Secure the computer frame (4) to the Left&right upright tube (2) with 2 bolts M8*32 (9), 2 Gasket
D8 (22); and then tight the computer frame (4) with 2 bolts M8*15 (10) and 2 arc washers D8 (26).
3). Put the 2 handlebar cap (32) onto the computer frame(4).
Step 4
Push the spring (25) into the pin (24), and then push the pin (24) into the hole of left upright tube (2L).
Secure the pin with knob (66).
Tight all screws and put the safety lock (69) on the console.