MECHANICAL COMPONENTS LIST Ne. Name Tty Ne.
el YouTube installation video available at be/FQLOW26CoFA L or search: SM7300 Installation Video on YouTube, | Sept. How to move the chair | & Slowly take the chair out of the how With the help of another person, grab the left and right metal frame of the massage chair. Mote Please place the cremate on top of the chair seat in order to avoid it getting crushed when lading down the chair 8 Take out the remainder of the assembly items and place therm to the side. s o mm BLY Left shoulder Right shoulder .
Step. After the assembly i After the assembly, please operate the char in this order & Piling the cable line in the hole 3 on the power box as shown in the right picture. Hole a connect width one end of cable line. @ insert the plug of cable ling into the casket 8 Switch on/off press | down 1o turn i ony @ Enjoy the massage by using the rioter carol.
Step S. Set up the seat side air bags and remote control [ How to set up the seat side air bags @ Take out the left and right seat side air bag, put the zipper side towards the seat cushion, insert the two cylinder pins into the holes of seat frame firmly. & Concert the aif tube with the air cock behind the seat firmly.
Step. Massage chair position return After taking out the main chair body, plug in the power cord and turn on the switch. The chair will recline to the up position. Unplug the power cord to male the choir retain this position [ Step. How to assemble the leg rest [ Install the leg rest to the main body, Becket A nozzle @ Unscrew the 2 screws from the ey Own Black Axs hover fatties on the leg rest portion of the main chair body. @Connect the 3 air tubes to the air connectors on the main chair body.
el I Ste pd. How to assemble the left and right armrest & Unscrew the ME screw on the seat frame with a cross screwdriver. @ V While pushing down the release button an the fixed hole located in the rear section of the side panel, insert it into the short metal rad sticking out from the tof section of the main chair body, @ Insert the square tube like metal piece on the side panel 1o the side piece located o the rear end of the main chair body. Sightly move the armrest to make the bolt holes align.
THE ADJUSTMENT BEFORE MASSAGE | Environment i l Check environment fi Caution Space size for using the chair e+ At Register 3 inches from wall, 4 Dot use the char in wet places lke near the swimming pool and bath roomy to avoid leakage ar electric shock. Dan't use under the sunlight or near stove or either heating place td avoid upholstery being deteriorated, Please use chair in & flat place to avoid chair falling or noise or other unexpected troubles.
How to move massage chair ] [ Adjustment before massage | fi Caution Be lore adjustment * Please make sure the Don't move char when it's working in massage head in the case of accidents or damage. seat part before sitting on the char. G ~Ta avid injures raised oW to move by wrong position of the massage head. + Bind the cables and put them in the seat .
TECHNICAL DATA Name TIL-track Massage chair | Power 200 Main body 19842 b/ 24692 b Meade! SM 7300 NW/GW Armrest39.66 b /6173 b Input vantage | ACACIA, 60Hz Main body packing size 5118x29.38x49 41 inch Armrest Safety design | Class 1 44.49% 16.54% 33.
Product Massage Chair Modal SM 7300 Developed by AJX Distribution LLC 25 Knotting Ave, Suite £ Cypress, €A 90630 Tel +855-646-9500 Email INFOBKAHUNACHAIR.COM You rust register warranty at way kahunachaircom/services/ INSTRUCTION MANUAL Please read this user manual thoroughly prior to MODELS 7300 operating the massage chair. Si ore this booklet for future reference.