User Manual

Page 14
Notes:1.You can now safely insert your PCMCIA card or USB
adapter. The “Add New Hardware Wizard”
automatically loads the Drivers for your PCMCIA card
or USB adapter.
2.In the Windows 2000 installation procedure an extra
window appears prompting you to select whether you
would like to install the “Digital Signature Not Found”
or not. You can safely select “YES”.
3.2 Uninstall Procedure Under Windows
95/98/Me
In order to uninstall the Configuration & Monitor Utility from
Windows95/98/Me, you must select the “ Uninstall
Configuration & Monitor Utility” option (Start -> Programs ->
Kailink 802.11 Wireless LAN -> Uninstall Configuration &
Monitor Utility). It is recommended to stop the PCMCIA card or
USB adapter and “Exit” the application prior to starting the
unistallation procedure. If during the uninstall procedure you
receive an error message, please insert the CD which contains
the setup program and try to uninstall the Utility again.
The above procedure uninstalls the Configuration & Monitor
Utility, but not the card itself. In order to uninstall the KAI-LINK
Wireless LAN Card from Windows 95/98/Me, you must double
click on the “Network” option in the “Control Panel” ( Start ->
Settings -> Control Panel ). Select the “KAI-LINK PCMCIA
FastVNET (3.3V)” card or “KAI-LINK USB FastVNET(AR)”
adapter from the list and press the “Remove” button. The
system will prompt you to re-boot. Press "Yes" to re-boot.
3.3 Uninstall Procedure Under Windows 2000