User Manual

Page 21
Monitor
A typical screen of the application in Infrastructure mode is
shown in Figure 5-2. The configuration parameters are shown
at the top of the screen (Operation Mode, Channel, SSID,
TxRate, Power Management Mode and MAC Address of the
PCMCIA card). In the middle of the screen there is information
about the status of the communication (the BSSID of the
Access Point to which the card is associated, Signal Strength,
and Link Quality). In order to change the configuration
parameters press the “Change” button, make your changes and
then press “Submit” in order to save your changes.
Figure 5-2. A typical screen of the Monitor Utility in
Infrastructure mode.