User Manual

Page 5
2 Quick Installation
This section provides a quick step by step guide on how to
install your KWL-210/220 Wireless LAN Card. Please follow the
steps described below and refer to the appropriate sections for
further details:

Power on the computer

Please make sure that you don’t insert your PCMCIA /USB
adapter yet.
 Install the drivers and application:
Insert the given Installation CD into your CD-Rom drive.
Select the Utilities & Drivers folder.
Locate the executable file “setup.exe” and double click it.
Follow the installation instructions from the InstallShield
Wizard by pressing the “Next” button.
Choose the appropriate of installation, according to your
needs, (Application Only, Application & PCMCIA Drivers,
Application & USB Drivers or Application & PCMCIA & USB
Drivers).
Provide the destination path of where the application will be
installed. To set the path of your choice select Browse and
then Next.
Choose the Mode of Operation (Ad-Hoc or Infrastructure)
In Ad-Hoc Mode, set the same ESSID for all participants
station, and choose the channel of operation.
In Infrastructure Mode
,
set the ESSID to be the same with
the ESSID of the AP to which you will be associated with.
Confirm the current settings of ESSID, Network Mode and
Utility directory and click Next.
Finish the installation.

Insert your PCMCIA card or USB adapter.