User Manual

1. Set the [Multi-function Switch] to position to turn on the flashlight
function.
2. Set the [Multi-function Switch] to position to turn off the function.
1. This built-in the Ni-MH batteries
compartment is in the rear of the
Radio.
2. The rechargeable Ni-MH batteries
has been disconnected for transport-
ation and storage.
3. Before using the radio, please open
the batteries compartment and
connect the rechargeable batteries’s
plug into its socket according to the
correct direction. Then set the [Power
Switch] to position.
1. This batteries compartment is in
the bottom of the radio.
2. After installing the batteries, set
the [Power Switch] to position.
®
Voyager V2
User’s Manual
®
Voyager V2
User’s Manual
Using the Batteries
Solar Power
Using the Flashlight
3 4
Using the Rechargeable Ni-MH
Batteries
Using the AAA Batteries
+
+
+
-
-
-
Rear View
Bottom View
CAUTION!
The Ni-MH batteries and AAA batteries (Alkaline or Rechargeable Batteries) is
supply power separately. And the AAA batteries is optional accessories.
1. Put the radio in the sunlight, make the solar panel of the radio is irradiated
directly by the sunlight.
2. If the sunlight is enough strong, the “CHA” indicator in the front of the radio
will be lit. That means solar energy can be used for the radio. The radio will
charging the Ni-MH batteries automatically.
Top View
Right Side View