User Manual

Listening to Preset Stations
1. Select the band.
2. Press the <M+> or <M-> button shortly to select the
preset frequency address. In this way, you can find
the preset station quickly.
FM
%
DD
TT
E E
MONO
PM
AIR
FM
AM
WB
NOAANOAA
ENABLE
DISABLE
ALL
MULTIPLE
SINGLE
COUNTY
VOICE
SIREN
ZZ Z
ALERT
%
DD
TT
EE
Press the <M+> or <M-> shortly
Frequency Address Changes
:
89 80
M55
MHz
(1) Manual
(2) Direct Frequency Entry Listening
1. Select the band.
2. In the preset mode, input the frequency address directly,
and then press the <MEMORY> button shortly to listen to
the program.
TUNING INTO STATIONS
NOTE In the preset mode, there are icon "M" and the frequency address
showing in the display. You can press the <M+> or <M-> button to entry into the
mode.
Manual Tuning Storage
PM
AIR
FM
AM
WB
NOAANOAA
ENABLE
DISABLE
ALL
MULTIPLE
SINGLE
COUNTY
VOICE
SIREN
ZZZ
ALERT
%
D
D
T
T
E
E
Press and Hold <MEMORY>
FM
%
DD
TT
E E
MONO
Frequency Changes
:
89 80
M55
MHz
FM can store 100 memories and address 00 is advised to
be stored while manual tuning.
AM can store 25 memories and address 00 is advised to
be stored while manual tuning.
LW can store 10 memories and address 00 is advised to
be stored while manual tuning.
SW can store 100 memories and address 00 is advised to
be stored while manual tuning.
13 14
TUNING INTO STATIONS
Press the <MEMORY> button shortly to enter into the
memory mode with "M" and the preset memory
address flashes, then press the <M+> or <M-> button
shortly to select the preset memory address.
2. Press the <MEMORY> button shortly once again to
confirm. The station address is stored in the memory.