Use and Care Manual

- 11 -
Round rubber plug (KRC-90BV 2pcs,
KRC-150BV 3pcs)
To cover the holes on the left front
corner of the body..
Water box (Only for KRC-90BV)
The water box is at the bottom inside
the beverage refrigerator. If you feel
beverage refrigerator inside is dry,
you could have some water in it to
increase humidity.
KRC-120BV
Screw *2
For the handle installation.
Gasket *2
For the handle installation.
Operating Your Beverage Refrigerator
The Control Panel:
How to use the press-buttons on the Display Panel:
z To control the temperature, press UP or DOWN button. To control the temperature, press UP and DOWN button.
Each press would adjust the temperature by 1°C between 3~10°C or 1°F between 38~50°F.
z To turn on or off the internal LED lighting, press LIGHT button on the right side.
z To switch the temperature display from Celsius Degree to be Fahrenheit Degree or vice versa, press C/F button.
Care And Maintenance
Cleaning your beverage refrigerator
z Unplug the beverage refrigerator and remove the bottles.
z Wash the inside with warm water or baking soda solution. The solution should be about 2 tablespoons of baking
soda to a quart of water.
z The outside of beverage refrigerator should be cleaned with mild detergent or warm water.
z Draw out the water box at the bottom, and wash it.
Moving your beverage refrigerator
z Remove all the bottles.
z Securely tape down all loose items inside your beverage refrigerator.
z Turn the leveling legs up to the base to avoid damage.
z Tape the door.
z Be sure the beverage refrigerator stays in the upright position during transportation.