Use and Care Manual

9
1. Steps for replacing plug fuse (12/24 V):
–Unplug the DC power plug;
–Turn anticlockwise the cap to remove it and fuse from the plug;
–Replace the defective fuse with a new one that has the same rating (insert style 32V 10-15A);
–Tighten the cap.
Warning: rated current for fuse should be within 10-15A, no less than 10A and Max. is 15A.Fuse
with rated current less than 10A will be easily burnt during compressor starting procedure;
Fuse with rated current more than 15A will burn battery fuse in car when refrigerator use car battery.
2. Steps for replacing the light:
–Unplug the power plug and open refrigerator’s lid;
–Unscrew the light pressing board with a screwdriver;
–Pry out the transparent light cover;
–Remove light component from transparent light cover;
–Replace the defective light component with a new one;
–Fit new light component using reverse of removal instructions.
IX. Cleaning and Maintenance
Warnings: Always disconnect the device from the mains before you clean and
service it.
Warnings: Do not use abrasive cleaning agents or hard objects during cleaning as these can
damage the refrigerator.
- Occasionally clean the device interior and exterior with a damp cloth. -Clean heat
dissipation window frequently to ensure good heat dissipation.