Instruction Manual & Operation Guide Compressor Beverage Cooler Model: KRC-70BV 93 cans Please read carefully and follow all safety rules and operating instructions.
Contents I. II. III IV. V. VI. VII. VIII. IMPORTANT SAFETY INSTRUCTIONS PARTS DIAGRAM TEMPERATURE CONTROL ELECTRIC DIAGRAM INSTRUCTION VENTILATION CLEANING TROUBLE SHOOTING 2 4 4 5 6 6 6 7 Please read all instructions carefully and follow all guidelines and rules for optimum performance and proper appliance usage. I.
Your safety and the safety of others are very important. We have provided many important safety messages in this manual for your Beverage cooler. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words” DANGER”, "WARNING” or "CAUTION”.
II. PARTS DIAGRAM Model No: KRC-70BV 1. Cabinet 2. Shelf 3. Retainer Bar 4. Foot 5. Upper Door Hinge with Cover 6. Glass Door 7. Integrated door handle 8. Temperature Control 9. Bottom Hinge III. TEMPERATURE CONTROL It is recommended that the Beverage cooler be installed in an area where the ambient temperature is between 5-32ºC (41-90ºF).
OPERATING YOUR UNIT--Setting the Temperature Control Your unit has only one control for regulating the temperature in the compartment. The temperature control is located at the upper right-hand side of the compartment. The first time you turn the unit on, set the temperature control to"5”. The range of the temperature control is from position "0" to"5".
V. I NSTRUCTION Note: Important: Position your Cooler so that the plug is accessible. Keep your Cooler out of direct sunlight. Do not place next to heat generating appliance. Place the Cooler on a leveled surface that is strong enough to support the unit when it is fully loaded. To level your Cooler, adjust the front feet located at the bottom of the unit. Before connecting the unit to a power source, allow it stand upright for approximately 3 hours.
IX. TROUBLE SHOOTING PROBLEM POSSIBLE CAUSES Appliance does not operate · The unit may be plugged in using a different voltage. · The circuit breaker may be tripped or there is a blown fuse. The Cooler is not cold enough. · Check the temperature control settings, as the external environment may be too hot. · The door may be opened too frequently. · The door is not closed completely. · The door seal does not seal properly. · The Cooler does not have sufficient clearance.
To obtain service or information, please call 866-554-6688 or send email to service@kalamera.com Product contents and specifications may change without notice. Copyright © 2016 Kalamera Products www.kalamera.
